Energy Storage Applications – Front-of-the-Meter and Behind-the-Meter Perspective

Related products

• 

  Battery Selection Tutorial Course 3/3: Integrating Your Battery Into Your Product – Designing for Worst-Case Scenarios

  The last part in Exponent’s three-part series, this webinar will focus on the finished product from the viewpoint of the battery. How can you best protect your battery within your device? Is your battery going to be user-replaceable? If you’re creating multi-cell packs, how should they be separated from (yet still connected to) each other? Should a thermal event occur, how can you prevent that from cascading through the whole pack? This webinar will help to answer many of those questions, and discuss design questions to help safeguard your battery pack throughout its entire lifecycle.

  This webinar will focus on the following key topics:

  • Creating multi-cell packs
  • Containing thermal runaway events

  Presenter
  Exponent – a multidisciplinary engineering and scientific consulting firm with significant experience in various aspects of battery design, safety testing and failure analysis.

  Buy Now
• 

  Understand and Prevent Battery Fires and Explosions – and Avoid Costly Failures Like the Samsung Note 7

  Modern batteries (eg Li-Ion) contain hazardous chemicals & they heat up during use: this combination always has the potential to cause fires & explosions. This presentation will focus on improving the understanding of how these incidents occur, what can be done to avoid them & how the risk can be minimized during early stage design.

  The Samsung Note 7 phone & Boeing Dreamliner airplane fires are very costly examples of how even large corporations fail to understand the potential fire risk of batteries.

  The solution lies in knowledge of heat generation rate during normal use & information about safe boundaries such as temperature, discharge rate & overcharge, in realistic situations that represent actual use conditions. Data from commercial batteries of different types will be used to illustrate these points.

  A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.

  This webinar will focus on the following key topics:

  • Why battery fires & explosions occur
  • How to design safer batteries though understanding of heat generation
  • Video evidence of batteries under explosive conditions
  • How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
  • Laboratory instruments suitable for testing and data generation

  Presenter
  Dr. Jasbir Singh – Managing Director at Hazard Evaluation Laboratory

  Jasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.

  A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.

  Buy Now
• 

  Maximizing Battery Performance and Reliability for Electric Vehicles and Energy Storage

  FREE Webinar – Voltaiq is a proud sponsor of this event.

  As automakers and utilities transition away from non-renewable energy sources, batteries have become essential for efficient energy storage and delivery. Companies are working intensely to deliver higher capacity and more robust batteries to power their products, but ad hoc development processes cannot keep pace with the volume of battery data being generated. In addition, understaffed battery  development teams are unable to leverage their data to accelerate development or improve production and manufacturing.

  In this webinar, we will outline the challenges that the battery industry is facing and how big data analytics can virtually eliminate manual data management and provide powerful capabilities that deliver rapid insights into a battery’s design that dramatically accelerate the development process and results in products with greater performance and reliability.

  This webinar will focus on the following key topics:

  • Recognizing the challenges and bottlenecks in battery development today
  • Automating the battery data collection, data cleaning, and data management process
  • Identifying design issues earlier with predictive analytics
  • Leveraging metadata to understand the impact of materials, processes and test conditions

  Presenter
  Dr. Tal Sholklapper – Co-Founder and CEO at Voltaiq

  Dr. Tal Sholklapper is a co-founder of Voltaiq and serves as the company’s Chief Executive Officer. Before co-founding Voltaiq, Dr. Sholklapper was the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra-low-cost grid-scale battery. Prior to his work at CUNY, Tal co-founded Point Source Power, a low-cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory (LBNL) and UC Berkeley. Dr. Sholklapper has a BS in Physics and Applied Mathematics and an MS and PhD in Materials Science and Engineering from UC Berkeley.

  Buy Now
• 

  Certification Challenges for Secondary Use EV Batteries

  As the 1st generation of Lithium-ion based hybrid and battery electric vehicles are reaching end-of life, or original traction batteries are being replaced with new batteries, the interest in secondary life or repurposing of these batteries continues to grow. Lithium-ion batteries present several challenges to Auto OEM’s, Recyclers and waste operators. Repurposing of EV batteries for non-automotive applications also creates new challenges for certification and acceptance by AHJ’s (Authorities Having Jurisdiction). This webinar discusses the current market challenges and concerns, while providing a roadmap of the current options for various usage cases of reused or repurposed EV batteries.

  This webinar will focus on the following key topics:

  • Understand the usage cases for secondary life batteries
  • Review market drivers for secondary use batteries
  • Review the concerns of battery and cell manufacturers with re-use of lithium-ion batteries
  • Discuss the unique challenges to certifying used batteries for new applications
  • Discuss current options for certification in the US market

  Presenter
  Rich Byczek – Global Technical Director for Transportation Technologies at Intertek

  Rich has over 20 years of experience in product development and validation testing, 14 of which have been spent at Intertek. Mr. Byczek is also an expert in the areas of energy storage, audio equipment and EMC testing. He sits on several SAE, IEC, UL and ANSI standards panels, focusing on Energy Storage and Electric Vehicle Technologies. He holds a Bachelor of Science in Electrical Engineering from Lawrence Technological University in Southfield, Michigan, and is based at the Intertek facility located in Plymouth, Michigan.

  Buy Now