$0.00
Sales of battery electrics (including PHEVs) are growing and new products are launching and in development, but the market is unsettled. Tesla remains the market leader, but its product plan and market strategy is unclear, even as Elon Musk has become a polarizing figure affecting Tesla’s sales results while his influence via his support of President Trump is likely to affect regulatory policy.
How will the industry respond to the opportunities and challenges?
Consumer interest in electric vehicles continues to grow, but is dependent on manufacturer strategies, product plans, and perhaps most important, pricing which will be affected by likely changes in consumer incentives. Charge anxiety is a key issue and is being addressed by an improved public charging network. But consumers need more information on if and how EVs will meet their needs.
This webinar will focus on the following key topics:
• Current sales and forecast to 2030
• Government policy is clearly changing, with action from all three branches at the federal level, as well as changes at the state level
• An effective strategy requires more than “Throwing the Switch” at a later date when multiple factors align
• Scale can be your friend or foe
• How evolving technology can lower cost
Presenter
Alan Baum – Principal, Baum & Associates
Alan Baum formed Baum & Associates in August 2009. The company produces a detailed sales forecast, market analysis, and product life cycle for the range of electrified vehicles and provides monthly sales results for these vehicles. Baum analyzes the impact of alternative fuel vehicles as well as advanced technologies in internal combustion engines that provide improved fuel economy. He consults with suppliers, the financial community, government agencies, and non-governmental organizations.
PlugVolt is a proud sponsor of this event.
Related products
-
Avoid Battery Explosions and Fires – With Right Data and Better Designs
Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.
The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.
A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.
This webinar will focus on the following key topics:
• Why battery fires and explosions occur
• How to design safer batteries through understanding of heat generation
• Video evidence of batteries under explosive conditions
• How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
• Laboratory instruments suitable for testing and data generationPresenter
Dr. Jasbir Singh – Managing Director at Hazard Evaluation LaboratoryJasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.
A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.
Buy Now -
Battery Selection Tutorial Course 1/3: Selecting your Cell and Cell Manufacturer(s)
After designing your product, you need to ensure the battery with which you are operating it will ensure the right performance and lifetime. When deciding this, narrowing down which chemistry (e.g. Li-ion, lithium primary, NiMH, etc.) best fits your product and which form factor are some of the first steps. Choosing a cell design (high-power vs. high-energy, for example) is another step and finally, finding the right cell manufacturer to fabricate your cells and packs. This webinar is the first in a three-part series on designing the right battery for your product. It will cover many of the key differences in chemistries, form factors, and cell designs and other best practices.
This webinar will focus on the following key topics:
• Choosing the right chemistry for your application
• Choosing the right form factor
• Choosing cell designs (e.g. high power vs. high-energy)Presenter
Buy Now
Exponent – a multidisciplinary engineering and scientific consulting firm with significant experience in various aspects of battery design, safety testing and failure analysis. -
Certification Challenges for Secondary Use EV Batteries
As the 1st generation of Lithium-ion based hybrid and battery electric vehicles are reaching end-of life, or original traction batteries are being replaced with new batteries, the interest in secondary life or repurposing of these batteries continues to grow. Lithium-ion batteries present several challenges to Auto OEM’s, Recyclers and waste operators. Repurposing of EV batteries for non-automotive applications also creates new challenges for certification and acceptance by AHJ’s (Authorities Having Jurisdiction). This webinar discusses the current market challenges and concerns, while providing a roadmap of the current options for various usage cases of reused or repurposed EV batteries.
This webinar will focus on the following key topics:
• Understand the usage cases for secondary life batteries
• Review market drivers for secondary use batteries
• Review the concerns of battery and cell manufacturers with re-use of lithium-ion batteries
• Discuss the unique challenges to certifying used batteries for new applications
• Discuss current options for certification in the US marketPresenter
Rich Byczek – Global Technical Director for Transportation Technologies at IntertekRich has over 20 years of experience in product development and validation testing, 14 of which have been spent at Intertek. Mr. Byczek is also an expert in the areas of energy storage, audio equipment and EMC testing. He sits on several SAE, IEC, UL and ANSI standards panels, focusing on Energy Storage and Electric Vehicle Technologies. He holds a Bachelor of Science in Electrical Engineering from Lawrence Technological University in Southfield, Michigan, and is based at the Intertek facility located in Plymouth, Michigan.
Buy Now -
Advanced Techniques For Addressing Issues in Battery Safety and Performance Using Adiabatic Calorimetry
FREE Webinar – THT is a proud sponsor of this event.
Adiabatic calorimetry is a widely utilized technique within the field of battery safety research. The method has been adapted from the chemical industry to address a significant range of safety and performance tests on battery components, cells and even modules.
Although a number of different battery tests may be employed using the ARC, interpretation of results is not always straightforward. Some of the principles which apply to ARC chemical testing do not translate directly to battery testing due to the variable nature of samples.
This presentation describes both the advantages and limitations of ARC testing on batteries and how the ARC test can be adapted to address different questions in battery research as well as quality control.
This webinar will focus on the following key topics:
• The principles of adiabatic calorimetry (ARC)
• How calorimetry can be used in battery testing
• What we learn from battery testing by calorimetry
• Pressure measurement and gas collection during thermal runaway
• Advanced testing techniques in adiabatic battery calorimetryPresenter
Danny Montgomery – Technical Performance Manager at THTDanny Montgomery joined THT in 2009 after graduating from Southampton University with a master’s degree in physics. His current role as Technical Performance Manager involves running the calorimetry lab with involvement in technical aspects of THT’s instrumentation.
Danny’s focus is primarily on lithium battery calorimetry; both adiabatic and isothermal. He oversees the use of calorimeters for customer sample testingas well as installing calorimeter systems and provided training and technical supportfor battery and automotive companies worldwide, such as Panasonic, BMW and Samsung. Danny works in THT’s UK office in Milton Keynes.
Buy Now