Calorimetric Measurements of Lithium-Ion Batteries Under Use and Abuse

Related products

• 

  Stability of Li7La3Zr2O12 Garnet Solid-State Electrolyte Against Metallic Lithium

  Energy storage demands will require safer, cheaper and higher performance electrochemical energy storage. While the primary strategy for improving performance has focused on state-of-the-art Li-ion batteries, this work seeks to develop solid-state batteries employing metallic Li anode. Recently, the ceramic electrolyte, Li7La3Zr2O12 (LLZO) cubic garnet, has shown promise owing to its unique combination of properties such as high Li-ion conductivity and electrochemical stability. Generally, LLZO is synthesized through powder processing and sintering at high temperature to produce dense membrane. Processing of the ceramic materials produces internal and surface flaws which will inhibit lithium transport creating localized current density and control the stability against Li dendrite propagation. This presentation will discuss new improvement in methodology to evaluate the integrity of LLZO membrane.

  This webinar will focus on the following key topics:

  • Methodology to evaluate the integrity of LLZO by identifying the microstructural flaws and their impact on mechanical properties
  • DC cycling, EIS, XPS will be shown to determine the reactions that govern the maximum current density
  • Correlate the electrochemical stability and critical current density with defects in polycrystalline solid state LLZO electrolyte

  Presenter
  Asma Sharafi – PhD Student with Jeff Sakamoto at University of Michigan

  Asma received her MS in Chemistry (material science) in 2013 at University of Georgia. Currently, she is a PhD student in Mechanical Engineering at University of Michigan under Jeff Sakamoto’s supervision. The primary focus of her research is on the development of new solid state electrolyte (SSE) with the garnet structure (Li7La3Zr2O12) that offer unprecedented safety and durability.

  Buy Now
• 

  Lithium Ion Capacitors – Combining Energy with Power

  FREE Webinar – JSR Micro, Inc. is a proud sponsor of this event.

  Lithium Ion Capacitors (LIC) are hybrids of electric double-layer capacitors (EDLCs) and lithium ion batteries (LIB). Combining the reversible non-Faradaic cathode from an EDLC and the reversible Faradaic anode from an LIB results in an ultra or super capacitor with significantly increased energy density, improved float performance and low self-discharge rates. Avoiding the lithium metal oxide cathodes from LIB’s improves the inherent safety and eliminates Cobalt content, however still combines aspects of energy & power of both cell types. The Faradaic intercalation/deintercalation reactions at the anode are capable of generating a significant amount of charge, while the non-Faradaic electrostatic storage of the electrical energy formed at the interface of the electrode and the electrolyte, known as an electric double layer, results in fast charge and discharge capabilities for hundreds of thousands, if not millions of cycles.

  This webinar will focus on the following key topics:

  • What is an LIC? Technology Introduction
  • Key Benefits
  • Safety
  • EDLC vs LIC
  • Applications

  Presenter

  Jeff Myron – Energy Solutions Program Manager at JSR Micro, Inc.

  Since 2011 Jeff has been responsible for business development in North America of JSR group’s environmental energy products including, lithium ion capacitors (LIC) and aqueous battery binders. Jeff joined JSR in 2006 as a Technical Sales Specialist for advanced photoresists utilized in IC manufacturing. Immediately prior to JSR, Jeff worked at Molecular Imprints developing the commercial infrastructure for next generation nano imprint lithography templates. Prior to joining Molecular Imprints, he held various engineering, engineering management & product management positions at Motorola, DuPont Photomask & Brewer Science. Jeff earned a bachelor’s degree in chemistry from Illinois State University in 1990 and an MBA from Webster University in 2001.

  Buy Now
• 

  Preventing Li Ion Battery Failures From a Manufacturing and Design Perspective

  How can you be proactive and make sure your cell supplier is the right one and you don’t end up with thermal events and field failures? Is it enough to qualify a cell manufacturer according to industry standards? The answer is that the majority of compliance based testing is related to abuse tolerance. However, the vast majority of field failures do not occur under abuse scenarios, but happen under normal operating conditions due to manufacturing flaws or design and system tolerance issues that cause internal shorts. In this webinar, you will learn about common lithium ion battery failure modes and how to be proactive in preventing these.

  This webinar will focus on the following key topics:

  • Gain an understanding of lithium ion battery failure mechanisms and the pathway to thermal events
  • Learn how cell design impacts battery safety and reliability
  • Learn the basic steps in a lithium ion cell manufacturing process, and how the process controls affect safety and reliability
  • Come away with a checklist to qualify your cell manufacturer

  Presenter
  Vidyu Challa – Technical Director at DfR Solutions

  Vidyu Challa is Technical Director at DfR Solutions where she works on battery reliability and safety issues. Dr. Challa helps customers with their battery challenges including design reviews, manufacturing audits and supplier qualification. She obtained a PhD from CALCE Electronic Products and Systems Center at the
  University of Maryland. She has broad based expertise that includes engineering technology start-up experience, product development, R&D, and business development. Dr. Challa has published her work in journals, presented at conferences and written blog articles.

  Buy Now
• 

  Energy Storage RTE Tutorial Course 3/3: Total Battery System RTE – Ranking and Comparison of Different Battery Chemistries

  RTE impacts of HVAC/Ventilation and Inverters will be described. Batteries generate heat, and this must be dissipated by system cooling and/or taken out of the system. Heat generated can be calculated by looking at IR heating and that generated (net) by exothermic reactions. Examples will include LFP, Li-NMC, Lead Acid and Nickel batteries, both when they are fresh, as well as at their end of useful life. The overall ancillary equipment energy usage will be listed for these systems, and a % RTE loss will be calculated for both nominal rate and high rate applications. Commentary will be provided for other systems. RTE will be summarized and ranked for most energy storage battery chemistries including ZA, NaS, LiS, Saltwater, Liquid Metal, Zinc Bromine and Fuel Cells.

  This webinar will focus on the following key topics:

  • RTE impacts of Inverters and HVAC
  • RTE impacts for ancillary equipment for different systems
  • RTE numbers for most battery systems being considered for energy storage

  Presenter
  Dr. Halle Cheeseman – Founder/President at Energy Blues LLC

  Dr. Halle Cheeseman earned a PhD in Electrochemistry & Corrosion from the University of Nottingham in UK, graduating in 1985. She has held several executive positions in the battery industry over the past 32 years, including Sr. VP of R&D at Spectrum Brands and VP of R&D at Exide Technologies. Her specific battery experience includes Lithium Ion, Zinc Air, Nickel Metal Hydride, Nickel Iron, Alkaline and Lead Acid, focusing on Consumer, Industrial, Automotive & Renewable Energy applications. In July 2017, Dr. Cheeseman founded Energy Blues LLC, an energy storage consulting cooperative comprising 20+ subject matter experts.

  Buy Now