-

BIS Tutorial Course 1/3: Introducing Battery Intelligence Systems (BIS)
FREE Webinar – Voltaiq is a proud sponsor of this event.
While the industry is familiar with the battery and its BMS (battery management system), very few are aware of the critical need for a missing third layer, the Battery Intelligence System (BIS) needed to enable the leap in battery yield, energy density, and lifetime the industry is calling for.
Battery Intelligence Systems are needed to leverage the latent value sitting in data that companies are collecting today, including but not limited to: data generated in battery factories in Asia, product OEMs around the globe, and ‘data lakes’ collecting data from systems in the field.
Your organization already has the building blocks to enable BIS. In this webinar we’ll show you the benefits of unlocking the value of your battery data.
This webinar will focus on the following key topics:
• The need for Battery Intelligence
• State of the industry: insufficient resources to meet aggressive electrification goals
• State of data today: “Treating it like a mushroom and watching it grow”
• Automation of standard analyses
• Traceability with Battery Digital Twins
Presenter
Dr. Tal Sholklapper – CEO at Voltaiq
Dr. Tal Sholklapper is the CEO of Voltaiq. Before co-founding Voltaiq, Dr. Sholklapper was the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra-low-cost grid-scale battery. Prior to his work at CUNY, Dr. Sholklapper co-founded Point Source Power, a low-cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory. Dr. Sholklapper has a BS in Physics and Applied Mathematics and an MS and PhD in Materials Science and Engineering from UC Berkeley, where he holds the honor of completing the fastest engineering PhD in two and a half years.
Voltaiq is a proud sponsor of this event.
Buy Now
-

Energy Storage Potential and Opportunities in India
India has aggressive targets for shifting to renewable energy, which at present is un-scheduled, and stresses the energy systems. One of the important means to meet these challenges is use of energy storage technologies. With launch of Smart Grids and Electric Vehicles missions, and new programs for on-site solar energy and rural micro-grids, energy storage has become a crucial component of energy strategy for India. This presentation will mainly focus on opportunities and potential of energy storage in India.
This webinar will focus on the following key topics:
• Drivers for Energy Storage in India
• Energy Storage Market Potential in India
– Grid Integration of RE
– 100 planned smart cities
– Microgrids
– Electric Vehicles
– Net metering policies
– Other opportunities
• Smart Grid Vision and Roadmap for India
• Energy Storage Initiatives in India
Presenter
Akshay Ahuja – Business Analyst (India Smart Grid Forum)
Akshay is currently working as Business Analyst with India Smart Grid Forum, a public-private partnership initiative of the Ministry of Power, Govt. of India. At ISGF, he is working closely with two working groups namely “Policy and Regulation” and “Pilots and Business Models”.
He is also part of modelling team working with Planning Commission of India on energy scenario exercise by putting all relevant numbers together into a calculator called “India Energy Security Scenarios, 2047”, for which he has worked on four themes – Electricity Import/export, Electrical Energy Storage, Carbon Capture and Storage, and Transmission & Distribution (T&D) losses and currently is also working on version 2 of the tool. He is also a contributor to India Smart Grid Bulletin, a monthly newsletter by ISGF.
Akshay earned an MBA in Power Management from National Power Training Institute (NPTI), and has a B.Tech in Electrical and Electronics Engineering from Lingaya’s Institute of Management and Technology.
Buy Now
-

Battery Safety Assessment: From Cell to Pack Level
FREE Webinar – PlugVolt is a proud sponsor of this event.
For fast and reliable battery pack development, a virtual assessment of battery safety via simulation is presented. The methodology, from single cell abuse testing up to battery pack simulation of crash and crush loads, is discussed. Cell tests that provide detailed understanding of the mechanical behavior of single Li-ion cells are used to improve battery stiffness and to optimize battery pack design.
This webinar will focus on the following key topics:
• Method description: battery safety assessment from cell to pack level
• Abuse cell tests
• Abuse cell simulations
• Crash and crush simulations at module and pack levels
Presenter
Jeremy Gaume – Project Manager, Analysis of Engineering and Technology Powertrain Systems at AVL GmbH
Jeremy Gaume graduated from the University of Technology of Belfort-Montbeliard (U.T.B.M.), France, with a Master Diploma in thermo-mechanical system modelling and optimization. He has 10 years’ of experience in the automotive field. Before joining AVL, he worked at Magna Steyr for CAE crash (passive safety) assessment. After joining AVL, he was appointed as a Project Manager for Analysis of Engineering and Technology Powertrain Systems. Jeremy is an expert on crash/safety simulation for batteries.
Buy Now
-

Lithium Ion Capacitors – Combining Energy with Power
FREE Webinar – JSR Micro, Inc. is a proud sponsor of this event.
Lithium Ion Capacitors (LIC) are hybrids of electric double-layer capacitors (EDLCs) and lithium ion batteries (LIB). Combining the reversible non-Faradaic cathode from an EDLC and the reversible Faradaic anode from an LIB results in an ultra or super capacitor with significantly increased energy density, improved float performance and low self-discharge rates. Avoiding the lithium metal oxide cathodes from LIB’s improves the inherent safety and eliminates Cobalt content, however still combines aspects of energy & power of both cell types. The Faradaic intercalation/deintercalation reactions at the anode are capable of generating a significant amount of charge, while the non-Faradaic electrostatic storage of the electrical energy formed at the interface of the electrode and the electrolyte, known as an electric double layer, results in fast charge and discharge capabilities for hundreds of thousands, if not millions of cycles.
This webinar will focus on the following key topics:
• What is an LIC? Technology Introduction
• Key Benefits
• Safety
• EDLC vs LIC
• Applications
Presenter
Jeff Myron – Energy Solutions Program Manager at JSR Micro, Inc.
Since 2011 Jeff has been responsible for business development in North America of JSR group’s environmental energy products including, lithium ion capacitors (LIC) and aqueous battery binders. Jeff joined JSR in 2006 as a Technical Sales Specialist for advanced photoresists utilized in IC manufacturing. Immediately prior to JSR, Jeff worked at Molecular Imprints developing the commercial infrastructure for next generation nano imprint lithography templates. Prior to joining Molecular Imprints, he held various engineering, engineering management & product management positions at Motorola, DuPont Photomask & Brewer Science. Jeff earned a bachelor’s degree in chemistry from Illinois State University in 1990 and an MBA from Webster University in 2001.
Buy Now