Thermal Runaway Testing and Cause Analysis of an Automotive Li-Ion Cell

Related products

• 

  Avoid Battery Explosions and Fires – With Right Data and Better Designs

  Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.

  The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.

  A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.

  This webinar will focus on the following key topics:

  • Why battery fires and explosions occur
  • How to design safer batteries through understanding of heat generation
  • Video evidence of batteries under explosive conditions
  • How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
  • Laboratory instruments suitable for testing and data generation

  Presenter
  Dr. Jasbir Singh – Managing Director at Hazard Evaluation Laboratory

  Jasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.

  A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.

  Buy Now
• 

  Battery Selection Tutorial Course 1/3: Selecting your Cell and Cell Manufacturer(s)

  After designing your product, you need to ensure the battery with which you are operating it will ensure the right performance and lifetime. When deciding this, narrowing down which chemistry (e.g. Li-ion, lithium primary, NiMH, etc.) best fits your product and which form factor are some of the first steps. Choosing a cell design (high-power vs. high-energy, for example) is another step and finally, finding the right cell manufacturer to fabricate your cells and packs. This webinar is the first in a three-part series on designing the right battery for your product. It will cover many of the key differences in chemistries, form factors, and cell designs and other best practices.

  This webinar will focus on the following key topics:

  • Choosing the right chemistry for your application
  • Choosing the right form factor
  • Choosing cell designs (e.g. high power vs. high-energy)

  Presenter
  Exponent – a multidisciplinary engineering and scientific consulting firm with significant experience in various aspects of battery design, safety testing and failure analysis.

  Buy Now
• 

  Electrochemical Impedance Spectroscopy and Its Application to Battery Analysis

  Electrochemical Impedance Spectroscopy (EIS) is a well-established experimental technique that has applications in coatings, corrosion, sensors, electrochemical double layer capacitors, batteries among others. The power of EIS partly comes from its ability to access a very wide range of frequencies (typically from MHz to μHz). For batteries, parameters such as the internal resistance, electrode surface capacitance and leakage are accessible at different frequencies across the spectrum. This allows EIS to gather all the relevant information with a single measurement. In this webinar, we will briefly introduce EIS and cover its application to batteries. We will talk about how to analyze typical data and how to gather the relevant information. We will further talk about available instrumentation and their limitations.

  This webinar will focus on the following key topics:

  • What is impedance spectroscopy?
  • What can impedance spectroscopy do for Battery analysis?
  • How can capacitance, internal resistance and leakage be determined using EIS?
  • What are the instrumental requirements and limits?

  Presenter

  Chris Beasley – Gamry Instruments

  Chris Beasley received a BS in Chemistry from Kutztown University in 2000 and got a PhD in electrochemistry from University of North Carolina at Chapel Hill in 2010. His doctoral dissertation was on using redox-active nanoparticles as supercapacitors. Chris joined Gamry Instruments in 2010.

  Buy Now
• 

  Preventing Thermal Runaway in Energy Storage Systems (ESS)

  From air transportation to electric vehicles and most recently “Hover Boards”, our industry is painfully aware of the over-discharge malfunctions associated with high-energy lithium-ion batteries, yet according to recent studies, nearly 70% of all Energy Storage Systems currently deployed are lithium-ion. Avoiding the pitfalls of utilizing greater energy density in larger installations is what will be discussed. Michelle will walk through the recent innovations from materials and process tracking in battery manufacturing to comprehensive control of cells in a fully deployed system. Incorporating lessons learned from recent failure investigations by the NTSB and FAA as well as new DoE mandates, Michelle will discuss how to achieve and in some areas surpass the new emerging safety certifications for a multi-megawatt energy storage system.

  This webinar will focus on the following key topics:

  • Making batteries safe or making safe batteries? (control & mitigation)
  • Cell manufacture tracking, certification and response
  – NTSB & DoE analysis and current situation
  • Incorporating advanced battery management systems (BMS)
  – Active cell dynamic balancing
  – Cell replacement (hot-swapping)
  – System reconfiguration
  – Energy density scalability

  Presenter
  Michelle Klassen – VP of Business Development at Pathion, Inc.

  Michelle Klassen is VP of Business Development for PATHION Inc. which manufactures high-performance, safe, and reliable Energy Storage Systems (ESS) for commercial markets ranging from 86 kilowatt-hours in stand-alone systems to over 1 megawatt-hour in containerized units. Prior to PATHION, as Vice President at ZeroBase Energy, she led the design and implementation of power systems and micro-grids for customers, including the US Department of Defense, Kenya Ministry of Energy and the L.A. Department of Water and Power.

  Buy Now