$0.00
This talk introduces a comprehensive battery benchmarking index that provides data-backed insights into cell performance needed to evaluate and select the optimal batteries for your application. In this talk, we present a broad and diversified cell database and present the preliminary results from rigorous comparative analysis of these cells. We will end with industry leading battery analytics, enabling customer organizations to be agile and employ best practices with regard to testing and analysis in engineering.
This webinar will focus on the following key topics:
• Comparative analysis of cells in recently released products including EVs and power tools
• Demonstration of large scale analysis across the benchmarking database
• Demonstration of leveraging models and experimental data together
Presenters
Dr. Christianna Lininger – Director of Battery Engineering and Sciences at Voltaiq
Dr. Jan Richter – CEO and Co-Founder at Batemo
Dr. Christianna Lininger is the Director of Battery Engineering and Sciences at Voltaiq. She has a Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) focused in Chemical Engineering from Columbia University in the City of New York. Following her graduate studies she undertook post-doctoral studies at University of California, Berkeley. Her research was focused on theoretical computational chemistry and physics-based modeling for renewable energy technologies.
Dr.-Ing. Jan Richter studied electrical engineering and information technology at the Karlsruhe Institute of Technology (KIT). He focused on electric mobility and the fields of electrochemical energy storage, power electronics, and electrical machines. He has completed his doctorate on modelling, parameter identification and control of highly-utilized synchronous machines, graduating summa cum laude.
Voltaiq is a proud sponsor of this event.
Related products
-
Avoid Battery Explosions and Fires – With Right Data and Better Designs
Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.
The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.
A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.
This webinar will focus on the following key topics:
• Why battery fires and explosions occur
• How to design safer batteries through understanding of heat generation
• Video evidence of batteries under explosive conditions
• How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
• Laboratory instruments suitable for testing and data generationPresenter
Dr. Jasbir Singh – Managing Director at Hazard Evaluation LaboratoryJasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.
A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.
Buy Now -
Advancing Mining Processes to Make Better Materials for Use in Lithium Ion Batteries
American Manganese Inc has developed a low-cost, environmentally friendly hydrometallurgical process to recover manganese (Mn) from lower grade resources. American Manganese has applied for a patent for their hydrometallurgical process that produces electrolytic manganese metal with low energy and water consumption. American Manganese commissioned R&D contractor, Kemetco Research Inc to determine uses of Artillery Peak manganese resource material to generate high value alternative products. Chemical manganese dioxide (CMD) and lithiated manganese oxide (LixMn2O4) for use in rechargeable batteries were the areas researched.
The research was successful in producing CMD from Artillery Peak resource material with low cation impurities and avoiding processing steps that are known to introduce metallic impurities in the final product. Cation impurities cause capacity fade, whereas metallic impurities are known to cause catastrophic failures (such as fire and explosions) in lithium ion batteries. Working rechargeable lithium ion coin cell battery prototypes were produced from the CMD material.
This webinar will focus on the following key topics:
• Catastrophic failure of Li Ion batteries caused by metallic impurities that may be introduced from the mining of raw materials
• Conventional mining process to recover MnO2 used to make LiMn2O4
• Research on a new mining process that avoids steps known to introduce metallic impurities to recover MnO2 used to make LiMn2O4Presenter
Norman Chow – President – Kemetco Research, Inc.Norman earned a B.A.Sc. and M.A.Sc. in Metals and Materials Engineering from University of British Columbia. He is a Registered Professional Engineer (P. Eng.) in British Columbia. He has over 15 years of technology development and contract research experience. He is the President of Kemetco Research Inc., which he formed after acquiring the Industrial Process Division of BC Research Inc. BC Research had been in operation for over 60 years as an R&D contractor.
Buy Now -
Preventing Thermal Runaway in Energy Storage Systems (ESS)
From air transportation to electric vehicles and most recently “Hover Boards”, our industry is painfully aware of the over-discharge malfunctions associated with high-energy lithium-ion batteries, yet according to recent studies, nearly 70% of all Energy Storage Systems currently deployed are lithium-ion. Avoiding the pitfalls of utilizing greater energy density in larger installations is what will be discussed. Michelle will walk through the recent innovations from materials and process tracking in battery manufacturing to comprehensive control of cells in a fully deployed system. Incorporating lessons learned from recent failure investigations by the NTSB and FAA as well as new DoE mandates, Michelle will discuss how to achieve and in some areas surpass the new emerging safety certifications for a multi-megawatt energy storage system.
This webinar will focus on the following key topics:
• Making batteries safe or making safe batteries? (control & mitigation)
• Cell manufacture tracking, certification and response
– NTSB & DoE analysis and current situation
• Incorporating advanced battery management systems (BMS)
– Active cell dynamic balancing
– Cell replacement (hot-swapping)
– System reconfiguration
– Energy density scalabilityPresenter
Michelle Klassen – VP of Business Development at Pathion, Inc.Michelle Klassen is VP of Business Development for PATHION Inc. which manufactures high-performance, safe, and reliable Energy Storage Systems (ESS) for commercial markets ranging from 86 kilowatt-hours in stand-alone systems to over 1 megawatt-hour in containerized units. Prior to PATHION, as Vice President at ZeroBase Energy, she led the design and implementation of power systems and micro-grids for customers, including the US Department of Defense, Kenya Ministry of Energy and the L.A. Department of Water and Power.
Buy Now -
Battery Selection Tutorial Course 3/3: Integrating Your Battery Into Your Product – Designing for Worst-Case Scenarios
The last part in Exponent’s three-part series, this webinar will focus on the finished product from the viewpoint of the battery. How can you best protect your battery within your device? Is your battery going to be user-replaceable? If you’re creating multi-cell packs, how should they be separated from (yet still connected to) each other? Should a thermal event occur, how can you prevent that from cascading through the whole pack? This webinar will help to answer many of those questions, and discuss design questions to help safeguard your battery pack throughout its entire lifecycle.
This webinar will focus on the following key topics:
• Creating multi-cell packs
• Containing thermal runaway eventsPresenter
Buy Now
Exponent – a multidisciplinary engineering and scientific consulting firm with significant experience in various aspects of battery design, safety testing and failure analysis.