$0.00
The transition to electric vehicles (EVs) is vital for climate action and cleaner air. However, responsibly managing EV batteries is crucial, particularly recycling to conserve resources and minimize environmental impact. Black mass, a concentrated form of cathode material extracted from spent batteries, contains valuable metals like nickel, cobalt, and manganese. Efficiently recovering these metals requires accurate composition analysis. Traditional methods are challenging due to the varying composition of black mass from different battery chemistries (like LFP and NMC variations viz. 622, 811, 111, 333, and 532). The CNA Pentos, with its unique D-T PFTNA neutron generator, offers a solution by enabling direct bulk measurement of black mass, facilitating optimized metal recovery processes.
This webinar will focus on the following key topics:
• E-mobility is crucial for climate action
• Battery recycling is essential for sustainability
• Black mass is rich in valuable cathode metals
• Accurate metal analysis is vital for efficient recycling
• CNA Pentos enables direct bulk elemental analysis of black mass
Presenter
Rajendra Mishra – Global Product Manager, CNA at Malvern Panalytical
Rajendra is a highly experienced Instrumentation Engineer with over 30+ years of global expertise in analytical instrumentation, utilizing x-ray and neutron activation techniques. He has proven success in developing and implementing automated solutions to address complex challenges for a wide range of industries.
Malvern Panalytical is a proud sponsor of this event.
Related products
-
Simulation Of Battery Crash – Where Do We Stand?
FREE Webinar – PlugVolt is a proud sponsor of this event.
Safety is an important functional requirement in the development of large-format, energy-dense, lithium-ion (Li-ion) batteries used in electrified vehicles. Computer aided engineering (CAE) tools that predict the response of a Li-ion battery pack to various abusive conditions can provide valuable insight during the design phase and reduce the need for physical testing.
However, the physics under such simulations is quite complex, and involves structural, thermal, electrical and electrochemical behaviors all coupled together and spanning length and time scales of different orders of magnitude.
In this talk, ANSYS LS-DYNA’s capabilities in the area of battery simulation will be introduced, current numerical challenges discussed, as well as a potential way forward towards including battery models in full car crash simulations.
This webinar will focus on the following key topics:
• The state of battery crash simulations
• Numerical challenges
• Capabilities of the commercial finite element code in ANSYS LS-DYNA
• A path towards capturing the thermal/mechanical/electromagnetic behavior of batteries during a full vehicle crashPresenter
Inaki Caldichoury – Software Developer at ANSYSInaki has been with ANSYS as a Software Developer since 2011, with a special focus on LS-DYNA and the electromagnetic and CFD solvers.
Buy Now -
BIS Tutorial Course 1/3: Introducing Battery Intelligence Systems (BIS)
FREE Webinar – Voltaiq is a proud sponsor of this event.
While the industry is familiar with the battery and its BMS (battery management system), very few are aware of the critical need for a missing third layer, the Battery Intelligence System (BIS) needed to enable the leap in battery yield, energy density, and lifetime the industry is calling for.
Battery Intelligence Systems are needed to leverage the latent value sitting in data that companies are collecting today, including but not limited to: data generated in battery factories in Asia, product OEMs around the globe, and ‘data lakes’ collecting data from systems in the field.
Your organization already has the building blocks to enable BIS. In this webinar we’ll show you the benefits of unlocking the value of your battery data.
This webinar will focus on the following key topics:
• The need for Battery Intelligence
• State of the industry: insufficient resources to meet aggressive electrification goals
• State of data today: “Treating it like a mushroom and watching it grow”
• Automation of standard analyses
• Traceability with Battery Digital TwinsPresenter
Dr. Tal Sholklapper – CEO at VoltaiqDr. Tal Sholklapper is the CEO of Voltaiq. Before co-founding Voltaiq, Dr. Sholklapper was the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra-low-cost grid-scale battery. Prior to his work at CUNY, Dr. Sholklapper co-founded Point Source Power, a low-cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory. Dr. Sholklapper has a BS in Physics and Applied Mathematics and an MS and PhD in Materials Science and Engineering from UC Berkeley, where he holds the honor of completing the fastest engineering PhD in two and a half years.
Voltaiq is a proud sponsor of this event.
Buy Now -
New Developments in Isothermal Microcalorimetry and ARC® Testing Methods
FREE Webinar – THT is a proud sponsor of this event.
This presentation describes two main types of calorimetric techniques which can be used to carry out performance and safety testing on batteries. These are isothermal calorimetry and adiabatic calorimetry.
THT’s new Micro Battery Calorimeter is presented along with initial data from a prototype unit. This device is focused on high sensitivity measurement which is required for coin and button cell samples which produce only milliwatts of heat during use. This is an example of an isothermal calorimeter system.
The second half of the presentation covers battery testing methods for the ARC® adiabatic calorimeter system. The theoretical background of the test method is described and recommended practice for various types of testing are discussed.
This webinar will focus on the following key topics:
• Principles of isothermal calorimetry for batteries
• Introduction to the Micro Battery Calorimeter and initial data
• Theoretical background to ARC® testing
• Recommended ARC® testing practicesPresenter
Danny Montgomery – Technical Performance Manager at THTDanny Montgomery has worked in Thermal Hazard Technology for 10 years. His current position is Technical Performance Manager. He manages THT’s test lab which has recently been expanded due to THT’s increasing cell testing workload.
He joined the company after graduating from Southampton University with a master’s degree in physics.
As well as managing the lab, Danny is involved with technical support, installation and training for THT’s calorimeter systems. He has provided training for battery and automotive companies around the world such as Panasonic, LG, Samsung, BMW and General Motors. Danny is based in THT’s head office in Bletchley, UK.
THT is a proud sponsor of this event.
Buy Now -
Myths and Realities in Battery Engineering for EVs
As the automotive industry continues an aggressive push toward electrification, misconceptions abound as to the best way to run an EV battery program. Mobility companies are set up for failure if they’re of the mindset to outsource battery engineering, or that they can easily “set and forget” a battery after initial qualification. These missteps can lead to catastrophic product failures including delayed product launches, high-volume RMAs, recalls or worse. In this webinar we’ll review the most common myths to help ensure that your organization doesn’t have to learn the hard way.
This webinar will focus on the following key topics:
• Myths and misconceptions about battery engineering
• Consequences of believing these myths
• Realities of battery engineering
• Common pitfalls and how to avoid themPresenter
Dr. Tal Sholklapper – CEO at VoltaiqDr. Tal Sholklapper has an extensive record of success as a cleantech engineer and entrepreneur. Prior to founding Voltaiq, he worked as the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra low-cost grid-scale battery. Before joining CUNY, Dr. Sholklapper co-founded Point Source Power, a low cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory and UC Berkeley, where he also did his graduate work in Materials Science and Engineering. As a Materials Postdoctoral Fellow at LBNL, he successfully led the transfer of lab-scale technology to industry partners.
Voltaiq is a proud sponsor of this event.
Buy Now