$0.00
Nearly 85% of battery costs are driven by the electrode, a thin-film composite that remains a significant bottleneck in manufacturing due to reliance on costly equipment, high operating expenses, and toxic solvents. Ateios Systems, a leader in battery component innovation, will present an overview of electrode manufacturing, comparing solvent-based, solvent-free, and dry-processing technologies. Central to this discussion is Ateios’ groundbreaking RaiCure™ process, which enables solvent- and forever-chemical-free production of RaiCore™ electrodes. The recently released High Voltage Lithium Cobalt Oxide (HV LCO) electrode, powered by RaiCure™, offers a 20% improvement in battery capacity (175–200 mAh/g vs. 150 mAh/g). Ateios and its production partners can produce nearly 200 MWh of electrodes that are accessible to cathode suppliers, battery OEMs, and electronics OEMs for purchase.
This webinar will focus on the following key topics:
• Introduction to battery slurry mixing and electrode coating
• Pros/cons of existing & emerging (solvent-free/dry) electrode manufacturing solutions
• Performance & production data of RaiCure-based electrodes
• Inception to production of Ateios’ electrode manufacturing services
Presenter
Kevin Barry – VP of Engineering at Ateios
Kevin Barry, Ph.D., is a Tech 25 Fellow with a Ph.D. in Physics from Florida State University, with over a decade of expertise in advanced manufacturing and thin-film device analysis. As VP of Engineering since 2021, he has led engineering and supply chain, including the world’s first forever-chemical-free battery (July 2024). He has led multiple production-grade solutions with validated performance, cost, and yield, addressing 85% of the battery market. Dr. Barry has also played a pivotal role in advancing next-generation products funded by multiple agencies and has successfully delivered over $3 million in products and services.
Ateios is a proud sponsor of this event.
Related products
-
Recycling of Lithium Ion Batteries From Electric Vehicles
The recycling of lithium-ion batteries – from EVs and others – will be discussed in this webinar.
Recently, the pilot plant of project LithoRec II could prove that a newly developed combination of process steps enables the recovery of a mass fraction of 75 % and more on a material recycling basis from lithium-ion batteries. This is supposed to be much better than state of the art. Combining different process steps like discharging, dismantling, shredding, sifting and air-jet separation the project partners were able to achieve their goal: proving that lithium-ion batteries can be recycled better. One interesting process dealing with the electrolyte came in a black box (which was actually white) and this was because of another ongoing patenting process of Lion Engineering. A modified and simplified process works to directly recycle scraps from the production of lithium-ion batteries – in order to protect both: the environment and the stakeholder’s money.
This webinar will focus on the following key topics:
• Recycling of Lithium Ion Batteries
• Recycling Yields and how to regain 75% and more – on a material recycling basis
• Direct Recycling of LIB-Production ScrapsPresenter
Christian Hanisch – CEO at Lion EngineeringChristian studied Process Engineering at TU Braunschweig (Germany) and has worked in the research project LithoRec and designed LithoRec II at the Institute for Particle Technology / TU Braunschweig on the topic of Recycling of Lithium Ion Batteries. He developed and patented new recycling processes and led the project to the realization of a pilot plant. Recognizing the highest interest of industrial partners in this topic he co-founded the spin-off Lion Engineering GmbH with fellow PhD students and Professor Arno Kwade in 2011. Beginning in 2016, Christian started to focus full-time on being CEO of Lion Engineering.
Buy Now -
Non-Destructive Testing: Insuring Safety, Reliability, and Reducing Cost of Li Batteries
Non-destructive non-contact electromagnetic, ultrasonic, holographic interferometry, gas discharge visualization, and combined methods are innovative tools for successful coordination of stages of R&D, manufacturing, and applications of Li batteries. Deployment of automated non-destructive quality assurance technology at every stage of the manufacturing process will increase the reliability and safety of batteries, while lowering overall manufacturing costs.
This webinar will focus on the following key topics:
• Physical principles of the non-destructive & non-contact methods for evaluation and testing of Li batteries during production:
– Initial materials, including nano-structured powders of electrode materials
– Polymer and solid inorganic electrolytes
– Properties of electrodes during coating, including the resistance of interface between current collectors and electrode mass
– Multi-layered electrode structures, as Jelly roll dry electrode structure
– Final product
• Design of equipment for non-destructive testing
• Examples of using the non-destructive methods in Li batteries, super-capacitors, solar cells, chemical industry, and other industries (example – evaluating the properties of the cement)
• Benchmarking, and the market of application for non-destructive, non-contact testingPresenter
Dr. Elena Shembel – Chairman & CEO at Enerize CorporationDr. Shembel is co-inventor of more than 50 patents and patent applications worldwide, including 15 US Patents and 1 Great Britain patent during last 8 years in the areas of batteries, solar cells, fuel cells, and non-destructive methods of testing. She earned PhD in “Electrochemical processes for systems with porous matrices for space systems”, and degree of Doctor of Chemical Sciences at the FSU Academy of Sciences Institute of Electrochemistry, Moscow for her work in processes and optimization of lithium batteries.
-
Avoid Battery Explosions and Fires – With Right Data and Better Designs
Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.
The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.
A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.
This webinar will focus on the following key topics:
• Why battery fires and explosions occur
• How to design safer batteries through understanding of heat generation
• Video evidence of batteries under explosive conditions
• How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
• Laboratory instruments suitable for testing and data generationPresenter
Dr. Jasbir Singh – Managing Director at Hazard Evaluation LaboratoryJasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.
A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.
Buy Now -
Preventing Li Ion Battery Failures From a Manufacturing and Design Perspective
How can you be proactive and make sure your cell supplier is the right one and you don’t end up with thermal events and field failures? Is it enough to qualify a cell manufacturer according to industry standards? The answer is that the majority of compliance based testing is related to abuse tolerance. However, the vast majority of field failures do not occur under abuse scenarios, but happen under normal operating conditions due to manufacturing flaws or design and system tolerance issues that cause internal shorts. In this webinar, you will learn about common lithium ion battery failure modes and how to be proactive in preventing these.
This webinar will focus on the following key topics:
• Gain an understanding of lithium ion battery failure mechanisms and the pathway to thermal events
• Learn how cell design impacts battery safety and reliability
• Learn the basic steps in a lithium ion cell manufacturing process, and how the process controls affect safety and reliability
• Come away with a checklist to qualify your cell manufacturerPresenter
Vidyu Challa – Technical Director at DfR SolutionsVidyu Challa is Technical Director at DfR Solutions where she works on battery reliability and safety issues. Dr. Challa helps customers with their battery challenges including design reviews, manufacturing audits and supplier qualification. She obtained a PhD from CALCE Electronic Products and Systems Center at the
Buy Now
University of Maryland. She has broad based expertise that includes engineering technology start-up experience, product development, R&D, and business development. Dr. Challa has published her work in journals, presented at conferences and written blog articles.