$99.00
As the number and variety of battery powered devices used in medical applications grows, batteries are playing an ever more important role in determining the reliability of these devices. Unlike the portable consumer electronics industry where high unit volumes can justify the design and manufacturing of custom batteries, the medical device industry must often utilize standard, off-the-shelf batteries for their devices. Even when the production of custom batteries is justified, few battery manufacturers appreciate the level of quality and reliability that is required by the medical device industry.
In this webinar we will look at how to quantify the performance characteristics of batteries in a way that allows direct comparisons to be made between various vendors, form factors and chemistries. Case studies will be presented to demonstrate common mistakes made in battery selection and use, and methods for conducting accelerated aging studies will be discussed. When properly conducted, such aging studies can be used to identify potential reliability issues, monitor the manufacturing quality of the batteries and serve as a tool to aid in the selection and qualification of various battery vendors.
This webinar will focus on the following key topics:
• What do you need to know that is not on the specification sheets?
• How do you make apples-to-apples performance comparisons between different battery types?
• When is impedance and/or capacity matching important in multi-cell configurations?
• How can quality be compared between vendors?
• How can battery longevity be predicted in specific applications?
Presenter
Dr. Quinn C. Horn – Principal Engineer at Exponent, Inc.
Dr. Quinn Horn has been with Exponent for ten years. He is also a Research Affiliate at the Massachusetts Institute of Technology, where he collaborates with researchers in the Electrochemical Energy Laboratory on projects related to electric vehicles and new gas diffusion electrodes for metal-air batteries and fuel cells.
Related products
-
Lithium Ion Capacitors – Combining Energy with Power
FREE Webinar – JSR Micro, Inc. is a proud sponsor of this event.
Lithium Ion Capacitors (LIC) are hybrids of electric double-layer capacitors (EDLCs) and lithium ion batteries (LIB). Combining the reversible non-Faradaic cathode from an EDLC and the reversible Faradaic anode from an LIB results in an ultra or super capacitor with significantly increased energy density, improved float performance and low self-discharge rates. Avoiding the lithium metal oxide cathodes from LIB’s improves the inherent safety and eliminates Cobalt content, however still combines aspects of energy & power of both cell types. The Faradaic intercalation/deintercalation reactions at the anode are capable of generating a significant amount of charge, while the non-Faradaic electrostatic storage of the electrical energy formed at the interface of the electrode and the electrolyte, known as an electric double layer, results in fast charge and discharge capabilities for hundreds of thousands, if not millions of cycles.
This webinar will focus on the following key topics:
• What is an LIC? Technology Introduction
• Key Benefits
• Safety
• EDLC vs LIC
• ApplicationsPresenter
Jeff Myron – Energy Solutions Program Manager at JSR Micro, Inc.
Since 2011 Jeff has been responsible for business development in North America of JSR group’s environmental energy products including, lithium ion capacitors (LIC) and aqueous battery binders. Jeff joined JSR in 2006 as a Technical Sales Specialist for advanced photoresists utilized in IC manufacturing. Immediately prior to JSR, Jeff worked at Molecular Imprints developing the commercial infrastructure for next generation nano imprint lithography templates. Prior to joining Molecular Imprints, he held various engineering, engineering management & product management positions at Motorola, DuPont Photomask & Brewer Science. Jeff earned a bachelor’s degree in chemistry from Illinois State University in 1990 and an MBA from Webster University in 2001.
Buy Now -
Development and Testing of Electric Drives and Battery Management Systems
Many types of hybrid and electric drive (E-Drive) control systems are being developed for platforms in several industries. These systems also use Battery Management Systems (BMS) to handle their demanding power needs. However, the development of these technologies brings increased system complexity, evident in the many platform variants and control algorithms of various electronic control units (ECUs).
dSPACE provides comprehensive solutions for E-Drive or BMS development, from providing proper hardware I/O interfaces for prototyping/testing these applications to real-time models for simulation of these controlled systems. There is also the need for consideration of power and safety requirements and precision of the simulation or control capability.
This presentation will cover RCP and HIL systems and models for the development and validation of E-Drive and BMS control systems. Specific implementation techniques for model processing and interfaces in real-time along with critical power interface and electrical hardware functionality will be shown.
This webinar will focus on the following key topics:
• Real-time Simulation Models for Electric Motors and Battery Systems
• Rapid Prototyping hardware for E-Drive and BMS Development
• Hardware-in-the-Loop (HIL) Simulators for testing E-Drive/BMS SystemsPresenter
Jace Allen – Lead Technical Specialist – Simulation & Test Systems at dSPACE Inc.Jace is the Lead Technical Specialist for Simulation and Test Systems at dSPACE, Inc, having designed and managed over 200 Hardware-in-the-Loop (HIL) system implementations for various customers. In the past 20 years he has handled many diverse modeling, controls, and simulation test applications in the Automotive, Commercial Vehicle, and Aerospace areas. His background includes modeling, simulation, and product development for vehicle powertrain, safety/security systems and also software development with embedded controls tools. He is a member of SAE, IEEE, and AIAA and has published 10 SAE Papers.
Buy Now -
Preventing Li Ion Battery Failures From a Manufacturing and Design Perspective
How can you be proactive and make sure your cell supplier is the right one and you don’t end up with thermal events and field failures? Is it enough to qualify a cell manufacturer according to industry standards? The answer is that the majority of compliance based testing is related to abuse tolerance. However, the vast majority of field failures do not occur under abuse scenarios, but happen under normal operating conditions due to manufacturing flaws or design and system tolerance issues that cause internal shorts. In this webinar, you will learn about common lithium ion battery failure modes and how to be proactive in preventing these.
This webinar will focus on the following key topics:
• Gain an understanding of lithium ion battery failure mechanisms and the pathway to thermal events
• Learn how cell design impacts battery safety and reliability
• Learn the basic steps in a lithium ion cell manufacturing process, and how the process controls affect safety and reliability
• Come away with a checklist to qualify your cell manufacturerPresenter
Vidyu Challa – Technical Director at DfR SolutionsVidyu Challa is Technical Director at DfR Solutions where she works on battery reliability and safety issues. Dr. Challa helps customers with their battery challenges including design reviews, manufacturing audits and supplier qualification. She obtained a PhD from CALCE Electronic Products and Systems Center at the
Buy Now
University of Maryland. She has broad based expertise that includes engineering technology start-up experience, product development, R&D, and business development. Dr. Challa has published her work in journals, presented at conferences and written blog articles. -
Accelerating Launch of New Battery Technologies by Expediting Samples Through Collaborative Partnerships
Polaris is a processing lab that accelerates new lithium ion battery developments resulting in faster delivery of samples. It provides processing services to accelerate the optimization of recipes for battery developers. Using its services, customers can avoid delays in launching products due to internal funding and staffing constraints.
Services include anode and cathode electrode mix and coat trials, pouch stack cell assemblies, cell and material analytical testing services, business advisory services, and a link to high volume production.
Two major roadblocks facing battery technology companies are addressed: 1) Startups lack staffing, process knowledge, funding, and equipment to develop samples, and 2) Commercialization of new battery technologies is capital intensive and takes long time to pass quality standards
This webinar will focus on the following key topics:
• Significant new material inventions in lithium ion and other advanced battery chemistries in the US
• Two primary issues or “gaps” in getting these technologies to the market
– generating samples for investors, customers and internal engineering evaluation and optimization
– building a battery factory and gaining product and quality system approval (a huge undertaking)
• Polaris Battery Labs Capability Overview for samples and commercialization
• Partner Profile; Carestream Heath as a contract coating partner to reduce time-to-market and risksPresenter
Doug Morris – CEO – Polaris Battery Labs, LLCDoug has over 30 years experience in the telecommunications, components, battery, and energy storage industries. Prior to working at Polaris Labs he was VP of Operations at Enevate. Doug has also held various executive, management, and engineering positions over his 21 year career with Motorola where he was VP and Director of Engineering, Quality, and Supply Chain Management for the Energy Systems Group. Doug was also a founder of Motorola’s Product Testing Services business.
Buy Now