Advanced Techniques For Addressing Issues in Battery Safety and Performance Using Adiabatic Calorimetry

Related products

• 

  Avoid Battery Explosions and Fires – With Right Data and Better Designs

  Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.

  The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.

  A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.

  This webinar will focus on the following key topics:

  • Why battery fires and explosions occur
  • How to design safer batteries through understanding of heat generation
  • Video evidence of batteries under explosive conditions
  • How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
  • Laboratory instruments suitable for testing and data generation

  Presenter
  Dr. Jasbir Singh – Managing Director at Hazard Evaluation Laboratory

  Jasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.

  A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.

  Buy Now
• 

  Non-Destructive Testing: Insuring Safety, Reliability, and Reducing Cost of Li Batteries

  Non-destructive non-contact electromagnetic, ultrasonic, holographic interferometry, gas discharge visualization, and combined methods are innovative tools for successful coordination of stages of R&D, manufacturing, and applications of Li batteries. Deployment of automated non-destructive quality assurance technology at every stage of the manufacturing process will increase the reliability and safety of batteries, while lowering overall manufacturing costs.

  This webinar will focus on the following key topics:

  • Physical principles of the non-destructive & non-contact methods for evaluation and testing of Li batteries during production:
  – Initial materials, including nano-structured powders of electrode materials
  – Polymer and solid inorganic electrolytes
  – Properties of electrodes during coating, including the resistance of interface between current collectors and electrode mass
  – Multi-layered electrode structures, as Jelly roll dry electrode structure
  – Final product
  • Design of equipment for non-destructive testing
  • Examples of using the non-destructive methods in Li batteries, super-capacitors, solar cells, chemical industry, and other industries (example – evaluating the properties of the cement)
  • Benchmarking, and the market of application for non-destructive, non-contact testing

  Presenter
  Dr. Elena Shembel – Chairman & CEO at Enerize Corporation

  Dr. Shembel is co-inventor of more than 50 patents and patent applications worldwide, including 15 US Patents and 1 Great Britain patent during last 8 years in the areas of batteries, solar cells, fuel cells, and non-destructive methods of testing. She earned PhD in “Electrochemical processes for systems with porous matrices for space systems”, and degree of Doctor of Chemical Sciences at the FSU Academy of Sciences Institute of Electrochemistry, Moscow for her work in processes and optimization of lithium batteries.

  Buy Now
• 

  Battery Ageing – How Modeling is Used to Predict Battery Life

  Battery modeling and simulation makes it possible to analyze multiple operating conditions and design parameters for batteries and other electrochemical systems and processes. By developing mathematical models you can begin to understand the interaction of electrochemical and chemical processes in the battery and how these processes affect the performance and life of the battery.

  In this presentation, we will take a look at the benefits of modeling and simulation in the design, selection, and operation of a lithium-ion battery. We will especially take a look at how modeling can be used together with testing. These results provide manufacturers and application experts with the data to not only predict battery life but to analyze the implications of design parameters and operating conditions to better understand the limitation of the battery.

  This webinar will focus on the following key topics:

  • Benefits of modeling and simulations in the design, selection, and operation of a lithium-ion battery
  • Implications of design parameters and operating conditions with respect to experimental observations of battery performance, aging, and battery safety
  • How battery modeling can be used together with testing

   Presenter

  Tom O’Hara – Global Business Manager, Intertek

  Tom O’Hara is the global business manager / advisory services for Intertek’s energy storage programs. Aside from his consulting role, Tom supports U.S. and European marketing and sales efforts and APAC CTIA certification efforts. As a 30-year veteran of the battery technology field, Tom has worked in Energizer Battery’s R&D sector and consulted with several start-up battery companies. He is also the co-inventor of the world’s first successful mercury-free zinc air button cell and holds seven U.S. patents. He obtained both a B.S. and M.S. in chemistry from Wake Forest University in North Carolina.

  Buy Now
• 

  Determination of Battery Safety and Performance Parameters Using Adiabatic and Isothermal Calorimetry

  FREE Webinar – Thermal Hazard Technology is a proud sponsor of this event.

  This presentation describes two main types of calorimetry which can be used to carry out safety and performance testing on batteries. Isothermal calorimeters allow for direct heat measurement on cells during use, while adiabatic calorimeters can measure heat released from batteries during thermal runaway.

  Calorimetry can serve as a quantitative scientific method for evaluation of battery safety but it requires appropriate instrumentation. The principles of operation of both types of calorimeters are described along with specific applications within the field of battery testing.

  A combination of both technics allows for detailed thermal characterization of lithium-ion and other rechargeable cells, and differences due to chemistry, cell design, cell age, state of charge and cell size can be evaluated.

  This webinar will focus on the following key topics:

  • The principles of adiabatic and isothermal calorimetry
  • How calorimetry can be used in battery testing
  • Parameters established by adiabatic safety testing
  • Parameters established by isothermal performance testing
  • Pressure measurement and gas collection

  Presenter
  Danny Montgomery – Technical Performance Manager at Thermal Hazard Technology

  Danny Montgomery has worked at Thermal Hazard Technology for 9 years. His current role is Technical Performance Manager; overseeing the lab and technical aspects of instrumentation manufactured by THT. He joined the company in 2009 after graduating from Southampton University with a master’s degree in physics.

  Danny’s focus is primarily on lithium battery calorimetry; both adiabatic and isothermal. He oversees the use of calorimeters for customer sample testing as well as installing calorimeter systems and provided training for battery and automotive companies worldwide, such as Panasonic, BMW and Samsung. Danny works in Thermal Hazard Technology’s UK office in Milton Keynes.

  Buy Now