$99.00
The success of an energy storage project for stationary applications depends, for a large part, on how well the battery performs over time. Since there are little case studies showing real-world lifetime performance comparisons for various technologies the battery selection is primarily based on the performance data in a laboratory environment. Knowledge of the test conditions under which the data is obtained is critical to determine the suitability of the battery technology for the intended application. The influence of test conditions on the battery performance, and consequently on the battery selection process is discussed. The presentation presents real-world examples to emphasize on how subtle and often unspecified test conditions can affect the performance and lead to an un-optimized battery solution.
This webinar will focus on the following key topics:
• Battery selection process for stationary energy storage
• Primary test conditions commonly presented
• But…what’s hidden beneath the surface?
• Examples of some subtle test conditions, if ignored, may lead to an un-optimized battery solution
• How a good understanding of the product performance under different conditions can empower our customers with operating options
Presenter
Ashok Saraswat – Director, Energy Storage Research at NEC Energy Solutions
Ashok Saraswat is working as Director, Energy Storage Research at NEC Energy Solutions located in the Boston area in the United States. After obtaining Ph.D. from Indian Institute of Technology, Delhi, India, Ashok Saraswat began his career in battery systems with a focus on Li-ion batteries. He has been involved in R&D, product and process development, assembly processes, and battery applications in various market segments including consumer electronics, aerospace and stationary storage.
Related products
-
Advancing Mining Processes to Make Better Materials for Use in Lithium Ion Batteries
American Manganese Inc has developed a low-cost, environmentally friendly hydrometallurgical process to recover manganese (Mn) from lower grade resources. American Manganese has applied for a patent for their hydrometallurgical process that produces electrolytic manganese metal with low energy and water consumption. American Manganese commissioned R&D contractor, Kemetco Research Inc to determine uses of Artillery Peak manganese resource material to generate high value alternative products. Chemical manganese dioxide (CMD) and lithiated manganese oxide (LixMn2O4) for use in rechargeable batteries were the areas researched.
The research was successful in producing CMD from Artillery Peak resource material with low cation impurities and avoiding processing steps that are known to introduce metallic impurities in the final product. Cation impurities cause capacity fade, whereas metallic impurities are known to cause catastrophic failures (such as fire and explosions) in lithium ion batteries. Working rechargeable lithium ion coin cell battery prototypes were produced from the CMD material.
This webinar will focus on the following key topics:
• Catastrophic failure of Li Ion batteries caused by metallic impurities that may be introduced from the mining of raw materials
• Conventional mining process to recover MnO2 used to make LiMn2O4
• Research on a new mining process that avoids steps known to introduce metallic impurities to recover MnO2 used to make LiMn2O4Presenter
Norman Chow – President – Kemetco Research, Inc.Norman earned a B.A.Sc. and M.A.Sc. in Metals and Materials Engineering from University of British Columbia. He is a Registered Professional Engineer (P. Eng.) in British Columbia. He has over 15 years of technology development and contract research experience. He is the President of Kemetco Research Inc., which he formed after acquiring the Industrial Process Division of BC Research Inc. BC Research had been in operation for over 60 years as an R&D contractor.
Buy Now -
Solid Electrolytes and Bulk Scale Solid-State Batteries
Recently, the push to move beyond Li – ion battery technology has grown. Several advanced battery technologies & chemistries have been identified as promising candidates including i) solid-state batteries with Li metal anode, ii) Li – S chemistries, iii) Li – air(oxygen), and iv) flow batteries. Although an engineered solution using liquids may be possible for some of these options, a solid electrolyte is an enabling technology for each of these beyond Li – ion alternatives. This webinar will introduce the operating principles of each of these cell technologies and solid electrolytes will be discussed in this context. The requirements of a solid electrolyte will be outlined & several state of the art solid electrolytes will be compared. Recent technical progress towards the fabrication of solid-state batteries will be reviewed. Finally, an overview of market applications for solid-state will be presented.
This webinar will focus on the following key topics:
• Overview of beyond Li – ion battery technologies enabled by solid electrolytes
• Comparison of state of the art solid electrolytes
• Recent technical progress towards solid-state batteries
• Review of market applications for solid-state batteriesPresenter
Travis Thompson – Post Doctorate Research Fellow at University of Michigan
Travis received his B.S. in Mechanical Engineering in 2010 from California State Polytechnic University, Pomona, and his PhD in Materials Science at Michigan State University in 2014. His graduate work has focused on synthesis & processing of materials for direct thermal-to-electric energy conversion & storage. This includes ambient drying of silica aerogels, processing of oxide based thermoelectric materials, & electrochemical characterization of ceramic solid electrolytes for advanced batteries. He is now a Research Fellow at The University of Michigan and is exploring commercialization of Solid-State Batteries from his graduate work.
Buy Now -
Accelerating Launch of New Battery Technologies by Expediting Samples Through Collaborative Partnerships
Polaris is a processing lab that accelerates new lithium ion battery developments resulting in faster delivery of samples. It provides processing services to accelerate the optimization of recipes for battery developers. Using its services, customers can avoid delays in launching products due to internal funding and staffing constraints.
Services include anode and cathode electrode mix and coat trials, pouch stack cell assemblies, cell and material analytical testing services, business advisory services, and a link to high volume production.
Two major roadblocks facing battery technology companies are addressed: 1) Startups lack staffing, process knowledge, funding, and equipment to develop samples, and 2) Commercialization of new battery technologies is capital intensive and takes long time to pass quality standards
This webinar will focus on the following key topics:
• Significant new material inventions in lithium ion and other advanced battery chemistries in the US
• Two primary issues or “gaps” in getting these technologies to the market
– generating samples for investors, customers and internal engineering evaluation and optimization
– building a battery factory and gaining product and quality system approval (a huge undertaking)
• Polaris Battery Labs Capability Overview for samples and commercialization
• Partner Profile; Carestream Heath as a contract coating partner to reduce time-to-market and risksPresenter
Doug Morris – CEO – Polaris Battery Labs, LLCDoug has over 30 years experience in the telecommunications, components, battery, and energy storage industries. Prior to working at Polaris Labs he was VP of Operations at Enevate. Doug has also held various executive, management, and engineering positions over his 21 year career with Motorola where he was VP and Director of Engineering, Quality, and Supply Chain Management for the Energy Systems Group. Doug was also a founder of Motorola’s Product Testing Services business.
Buy Now -
Energy Storage RTE Tutorial Course 3/3: Total Battery System RTE – Ranking and Comparison of Different Battery Chemistries
RTE impacts of HVAC/Ventilation and Inverters will be described. Batteries generate heat, and this must be dissipated by system cooling and/or taken out of the system. Heat generated can be calculated by looking at IR heating and that generated (net) by exothermic reactions. Examples will include LFP, Li-NMC, Lead Acid and Nickel batteries, both when they are fresh, as well as at their end of useful life. The overall ancillary equipment energy usage will be listed for these systems, and a % RTE loss will be calculated for both nominal rate and high rate applications. Commentary will be provided for other systems. RTE will be summarized and ranked for most energy storage battery chemistries including ZA, NaS, LiS, Saltwater, Liquid Metal, Zinc Bromine and Fuel Cells.
This webinar will focus on the following key topics:
• RTE impacts of Inverters and HVAC
• RTE impacts for ancillary equipment for different systems
• RTE numbers for most battery systems being considered for energy storagePresenter
Dr. Halle Cheeseman – Founder/President at Energy Blues LLCDr. Halle Cheeseman earned a PhD in Electrochemistry & Corrosion from the University of Nottingham in UK, graduating in 1985. She has held several executive positions in the battery industry over the past 32 years, including Sr. VP of R&D at Spectrum Brands and VP of R&D at Exide Technologies. Her specific battery experience includes Lithium Ion, Zinc Air, Nickel Metal Hydride, Nickel Iron, Alkaline and Lead Acid, focusing on Consumer, Industrial, Automotive & Renewable Energy applications. In July 2017, Dr. Cheeseman founded Energy Blues LLC, an energy storage consulting cooperative comprising 20+ subject matter experts.
Buy Now
Leave a Reply
You must be logged in to post a comment.