$0.00
FREE Webinar – THT is a proud sponsor of this event.
This presentation describes two main types of calorimetric techniques which can be used to carry out performance and safety testing on batteries. These are isothermal calorimetry and adiabatic calorimetry.
THT’s new Micro Battery Calorimeter is presented along with initial data from a prototype unit. This device is focused on high sensitivity measurement which is required for coin and button cell samples which produce only milliwatts of heat during use. This is an example of an isothermal calorimeter system.
The second half of the presentation covers battery testing methods for the ARC® adiabatic calorimeter system. The theoretical background of the test method is described and recommended practice for various types of testing are discussed.
This webinar will focus on the following key topics:
• Principles of isothermal calorimetry for batteries
• Introduction to the Micro Battery Calorimeter and initial data
• Theoretical background to ARC® testing
• Recommended ARC® testing practices
Presenter
Danny Montgomery – Technical Performance Manager at THT
Danny Montgomery has worked in Thermal Hazard Technology for 10 years. His current position is Technical Performance Manager. He manages THT’s test lab which has recently been expanded due to THT’s increasing cell testing workload.
He joined the company after graduating from Southampton University with a master’s degree in physics.
As well as managing the lab, Danny is involved with technical support, installation and training for THT’s calorimeter systems. He has provided training for battery and automotive companies around the world such as Panasonic, LG, Samsung, BMW and General Motors. Danny is based in THT’s head office in Bletchley, UK.
THT is a proud sponsor of this event.
Related products
-
Advancing Mining Processes to Make Better Materials for Use in Lithium Ion Batteries
American Manganese Inc has developed a low-cost, environmentally friendly hydrometallurgical process to recover manganese (Mn) from lower grade resources. American Manganese has applied for a patent for their hydrometallurgical process that produces electrolytic manganese metal with low energy and water consumption. American Manganese commissioned R&D contractor, Kemetco Research Inc to determine uses of Artillery Peak manganese resource material to generate high value alternative products. Chemical manganese dioxide (CMD) and lithiated manganese oxide (LixMn2O4) for use in rechargeable batteries were the areas researched.
The research was successful in producing CMD from Artillery Peak resource material with low cation impurities and avoiding processing steps that are known to introduce metallic impurities in the final product. Cation impurities cause capacity fade, whereas metallic impurities are known to cause catastrophic failures (such as fire and explosions) in lithium ion batteries. Working rechargeable lithium ion coin cell battery prototypes were produced from the CMD material.
This webinar will focus on the following key topics:
• Catastrophic failure of Li Ion batteries caused by metallic impurities that may be introduced from the mining of raw materials
• Conventional mining process to recover MnO2 used to make LiMn2O4
• Research on a new mining process that avoids steps known to introduce metallic impurities to recover MnO2 used to make LiMn2O4Presenter
Norman Chow – President – Kemetco Research, Inc.Norman earned a B.A.Sc. and M.A.Sc. in Metals and Materials Engineering from University of British Columbia. He is a Registered Professional Engineer (P. Eng.) in British Columbia. He has over 15 years of technology development and contract research experience. He is the President of Kemetco Research Inc., which he formed after acquiring the Industrial Process Division of BC Research Inc. BC Research had been in operation for over 60 years as an R&D contractor.
Buy Now -
Determination of Battery Safety and Performance Parameters Using Adiabatic and Isothermal Calorimetry
FREE Webinar – Thermal Hazard Technology is a proud sponsor of this event.
This presentation describes two main types of calorimetry which can be used to carry out safety and performance testing on batteries. Isothermal calorimeters allow for direct heat measurement on cells during use, while adiabatic calorimeters can measure heat released from batteries during thermal runaway.
Calorimetry can serve as a quantitative scientific method for evaluation of battery safety but it requires appropriate instrumentation. The principles of operation of both types of calorimeters are described along with specific applications within the field of battery testing.
A combination of both technics allows for detailed thermal characterization of lithium-ion and other rechargeable cells, and differences due to chemistry, cell design, cell age, state of charge and cell size can be evaluated.
This webinar will focus on the following key topics:
• The principles of adiabatic and isothermal calorimetry
• How calorimetry can be used in battery testing
• Parameters established by adiabatic safety testing
• Parameters established by isothermal performance testing
• Pressure measurement and gas collectionPresenter
Danny Montgomery – Technical Performance Manager at Thermal Hazard TechnologyDanny Montgomery has worked at Thermal Hazard Technology for 9 years. His current role is Technical Performance Manager; overseeing the lab and technical aspects of instrumentation manufactured by THT. He joined the company in 2009 after graduating from Southampton University with a master’s degree in physics.
Danny’s focus is primarily on lithium battery calorimetry; both adiabatic and isothermal. He oversees the use of calorimeters for customer sample testing as well as installing calorimeter systems and provided training for battery and automotive companies worldwide, such as Panasonic, BMW and Samsung. Danny works in Thermal Hazard Technology’s UK office in Milton Keynes.
Buy Now -
Stability of Li7La3Zr2O12 Garnet Solid-State Electrolyte Against Metallic Lithium
Energy storage demands will require safer, cheaper and higher performance electrochemical energy storage. While the primary strategy for improving performance has focused on state-of-the-art Li-ion batteries, this work seeks to develop solid-state batteries employing metallic Li anode. Recently, the ceramic electrolyte, Li7La3Zr2O12 (LLZO) cubic garnet, has shown promise owing to its unique combination of properties such as high Li-ion conductivity and electrochemical stability. Generally, LLZO is synthesized through powder processing and sintering at high temperature to produce dense membrane. Processing of the ceramic materials produces internal and surface flaws which will inhibit lithium transport creating localized current density and control the stability against Li dendrite propagation. This presentation will discuss new improvement in methodology to evaluate the integrity of LLZO membrane.
This webinar will focus on the following key topics:
• Methodology to evaluate the integrity of LLZO by identifying the microstructural flaws and their impact on mechanical properties
• DC cycling, EIS, XPS will be shown to determine the reactions that govern the maximum current density
• Correlate the electrochemical stability and critical current density with defects in polycrystalline solid state LLZO electrolytePresenter
Asma Sharafi – PhD Student with Jeff Sakamoto at University of MichiganAsma received her MS in Chemistry (material science) in 2013 at University of Georgia. Currently, she is a PhD student in Mechanical Engineering at University of Michigan under Jeff Sakamoto’s supervision. The primary focus of her research is on the development of new solid state electrolyte (SSE) with the garnet structure (Li7La3Zr2O12) that offer unprecedented safety and durability.
Buy Now -
Understand and Prevent Battery Fires and Explosions – and Avoid Costly Failures Like the Samsung Note 7
Modern batteries (eg Li-Ion) contain hazardous chemicals & they heat up during use: this combination always has the potential to cause fires & explosions. This presentation will focus on improving the understanding of how these incidents occur, what can be done to avoid them & how the risk can be minimized during early stage design.
The Samsung Note 7 phone & Boeing Dreamliner airplane fires are very costly examples of how even large corporations fail to understand the potential fire risk of batteries.
The solution lies in knowledge of heat generation rate during normal use & information about safe boundaries such as temperature, discharge rate & overcharge, in realistic situations that represent actual use conditions. Data from commercial batteries of different types will be used to illustrate these points.
A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.
This webinar will focus on the following key topics:
• Why battery fires & explosions occur
• How to design safer batteries though understanding of heat generation
• Video evidence of batteries under explosive conditions
• How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
• Laboratory instruments suitable for testing and data generationPresenter
Dr. Jasbir Singh – Managing Director at Hazard Evaluation LaboratoryJasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.
A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.
Buy Now
Leave a Reply
You must be logged in to post a comment.