$0.00
Laminated bus bars and cold plates are commonplace in a wide range of defense and space programs designed by Mersen‘s Rochester, NY plant, registered under ITAR with the U.S. State Department’s Directorate of Defense Trade Controls (DDTC).
Mersen’s laminated bus bars are engineered for optimal increased capacitance, minimal voltage drop and lower inductance ideal for SiC. All applications are tailored to a system’s environmental, physical, and electrical needs.
Mersen’s cold plates are designed to withstand harsh environment and provide a reliable cooling solution to meet application needs. The wide range of engineered solutions include air cooled heat sinks, embedded heat pipe assemblies to high performance liquid cold plates. These techniques come highly desired for removing heat from any diode, power amplifier or SiC device.
This webinar will focus on the following key topics:
• Bus Bar Solutions
• Cooling Solutions
Presenter
Philippe Roussel – VP of Global Strategic Marketing at Mersen
Philippe Roussel, Ph.D, graduated from the University of Lyon in Electronics and Microelectronics. He was granted a Ph.D in Integrated Electronics Systems from the Applied Sciences National Institute (INSA) in Lyon. He joined Mersen in 2014 as VP of Global Strategic Marketing for power electronics products line-up.
Mersen is a proud sponsor of this event.
Related products
-
Myths and Realities in Battery Engineering for EVs
As the automotive industry continues an aggressive push toward electrification, misconceptions abound as to the best way to run an EV battery program. Mobility companies are set up for failure if they’re of the mindset to outsource battery engineering, or that they can easily “set and forget” a battery after initial qualification. These missteps can lead to catastrophic product failures including delayed product launches, high-volume RMAs, recalls or worse. In this webinar we’ll review the most common myths to help ensure that your organization doesn’t have to learn the hard way.
This webinar will focus on the following key topics:
• Myths and misconceptions about battery engineering
• Consequences of believing these myths
• Realities of battery engineering
• Common pitfalls and how to avoid themPresenter
Dr. Tal Sholklapper – CEO at VoltaiqDr. Tal Sholklapper has an extensive record of success as a cleantech engineer and entrepreneur. Prior to founding Voltaiq, he worked as the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra low-cost grid-scale battery. Before joining CUNY, Dr. Sholklapper co-founded Point Source Power, a low cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory and UC Berkeley, where he also did his graduate work in Materials Science and Engineering. As a Materials Postdoctoral Fellow at LBNL, he successfully led the transfer of lab-scale technology to industry partners.
Voltaiq is a proud sponsor of this event.
Buy Now -
BIS Tutorial Course 3/3: Battery Intelligence in New Product Introduction (NPI) for Transportation and Consumer Electronics
FREE Webinar – Voltaiq is a proud sponsor of this event.
OEMs are faced with an ever growing list of challenges when designing batteries into their systems, from long qualification time, to increasingly complex systems and the lack of qualified battery engineers.
In this webinar, we’ll review the battery and systems qualification process for transportation and consumer electronics, including specific reference performance tests such as hybrid pulse power characterization (HPPC), that are used for BMS development.
We’ll then shift into how Battery Intelligence Systems (BIS) can both accelerate time to market for New Product Introduction (NPI), and can surface deeper insights about variability in batteries and packs to increase range, lower costs, and improve reliability.
This webinar will focus on the following key topics:
• The state of OEM new product introduction (NPI)
• Battery and system qualification
• BMS development and hybrid pulse power characterization (HPPC)
• Ensuring time to market for NPI
• Extending range and lifetime with component variability assessmentPresenter
Dr. Tal Sholklapper – CEO at VoltaiqDr. Tal Sholklapper is the CEO of Voltaiq. Before co-founding Voltaiq, Dr. Sholklapper was the lead engineer on a DOE ARPA-E funded project at the CUNY Energy Institute, developing an ultra-low-cost grid-scale battery. Prior to his work at CUNY, Dr. Sholklapper co-founded Point Source Power, a low-cost fuel-cell startup based on technology he developed while at Lawrence Berkeley National Laboratory. Dr. Sholklapper has a BS in Physics and Applied Mathematics and an MS and PhD in Materials Science and Engineering from UC Berkeley, where he holds the honor of completing the fastest engineering PhD in two and a half years.
Voltaiq is a proud sponsor of this event.
Buy Now -
Lithium Ion Capacitors – Combining Energy with Power
FREE Webinar – JSR Micro, Inc. is a proud sponsor of this event.
Lithium Ion Capacitors (LIC) are hybrids of electric double-layer capacitors (EDLCs) and lithium ion batteries (LIB). Combining the reversible non-Faradaic cathode from an EDLC and the reversible Faradaic anode from an LIB results in an ultra or super capacitor with significantly increased energy density, improved float performance and low self-discharge rates. Avoiding the lithium metal oxide cathodes from LIB’s improves the inherent safety and eliminates Cobalt content, however still combines aspects of energy & power of both cell types. The Faradaic intercalation/deintercalation reactions at the anode are capable of generating a significant amount of charge, while the non-Faradaic electrostatic storage of the electrical energy formed at the interface of the electrode and the electrolyte, known as an electric double layer, results in fast charge and discharge capabilities for hundreds of thousands, if not millions of cycles.
This webinar will focus on the following key topics:
• What is an LIC? Technology Introduction
• Key Benefits
• Safety
• EDLC vs LIC
• ApplicationsPresenter
Jeff Myron – Energy Solutions Program Manager at JSR Micro, Inc.
Since 2011 Jeff has been responsible for business development in North America of JSR group’s environmental energy products including, lithium ion capacitors (LIC) and aqueous battery binders. Jeff joined JSR in 2006 as a Technical Sales Specialist for advanced photoresists utilized in IC manufacturing. Immediately prior to JSR, Jeff worked at Molecular Imprints developing the commercial infrastructure for next generation nano imprint lithography templates. Prior to joining Molecular Imprints, he held various engineering, engineering management & product management positions at Motorola, DuPont Photomask & Brewer Science. Jeff earned a bachelor’s degree in chemistry from Illinois State University in 1990 and an MBA from Webster University in 2001.
Buy Now -
Battery Safety Assessment: From Cell to Pack Level
FREE Webinar – PlugVolt is a proud sponsor of this event.
For fast and reliable battery pack development, a virtual assessment of battery safety via simulation is presented. The methodology, from single cell abuse testing up to battery pack simulation of crash and crush loads, is discussed. Cell tests that provide detailed understanding of the mechanical behavior of single Li-ion cells are used to improve battery stiffness and to optimize battery pack design.
This webinar will focus on the following key topics:
• Method description: battery safety assessment from cell to pack level
• Abuse cell tests
• Abuse cell simulations
• Crash and crush simulations at module and pack levelsPresenter
Jeremy Gaume – Project Manager, Analysis of Engineering and Technology Powertrain Systems at AVL GmbHJeremy Gaume graduated from the University of Technology of Belfort-Montbeliard (U.T.B.M.), France, with a Master Diploma in thermo-mechanical system modelling and optimization. He has 10 years’ of experience in the automotive field. Before joining AVL, he worked at Magna Steyr for CAE crash (passive safety) assessment. After joining AVL, he was appointed as a Project Manager for Analysis of Engineering and Technology Powertrain Systems. Jeremy is an expert on crash/safety simulation for batteries.
Buy Now