$0.00
Proper selection of direct current (DC) overcurrent fuses is not as simple as it may seem, and several factors need to be looked at for proper selection. Design engineers need to look at many different things such as what we’re protecting, system voltage changes, circuit fault currents, minimum breaking currents, mechanical requirements, temperature deratings, system operation regarding cycling, etc. All of these and other factors need to be taken into consideration to safely select the proper DC fuse for each unique application. This presentation will take you through the basics of DC and AC fuses, DC circuit protection methods, and review EES fuse selection along with a case study. With the rapid growth of Electrical Energy Storage systems being implemented and deployed, we see an opportunity to educate everyone on this topic.
This webinar will focus on the following key topics:
• Fuseology
• Fuse Selection Practices
• DC Circuit Protection
• EES Fuse Selection Methodology
• Case Study
Presenter
Cynthia Cline – Principal Solutions Engineer at Mersen
Cynthia Cline, is Mersen’s Principal Solutions Engineer and has over 35 years of experience with customer applications and providing detailed circuit analysis to meet customer needs with AC and DC fuse protection. She is also active with codes and standards for UL and IEC protection products. She graduated with a degree in Electrical Power Systems from Michigan Technological University.
Mersen is a proud sponsor of this event.
Related products
-
Energy Storage RTE Tutorial Course 1/3: What is Round Trip Efficiency (RTE)? Why is it Important? How Much Does it Cost?
In the first of this three-part webinar series, a definition of RTE will be presented along with simple system equations that are important to its understanding, determination and management. RTE for some popular battery systems i.e. Lead Acid, Lithium Ion, Vanadium Redox and Nickel Zinc will be computed as examples, and their variation with common variables such as rate, capacity variability & SOC swing will be discussed. The costs of Round Trip inefficiency can be significant, and are experienced by customers either in higher energy generating capital costs and/or higher operating expenses. The calculation of these higher costs will be reviewed, and there will be a discussion on the key industry variables that influence them. Different geographic and customer markets will be considered.
This webinar will focus on the following key topics:
• The Importance of RTE to battery selection decisions
• How does RTE impact CAPEX and/or OPEX for energy storage
• How is RTE defined and how can it be derived – comparison of different systems
• An introduction to ancillary equipment energy lossesPresenter
Dr. Halle Cheeseman – Founder/President at Energy Blues LLCDr. Halle Cheeseman earned a PhD in Electrochemistry & Corrosion from the University of Nottingham in UK, graduating in 1985. She has held several executive positions in the battery industry over the past 32 years, including Sr. VP of R&D at Spectrum Brands and VP of R&D at Exide Technologies. Her specific battery experience includes Lithium Ion, Zinc Air, Nickel Metal Hydride, Nickel Iron, Alkaline and Lead Acid, focusing on Consumer, Industrial, Automotive & Renewable Energy applications. In July 2017, Dr. Cheeseman founded Energy Blues LLC, an energy storage consulting cooperative comprising 20+ subject matter experts.
Buy Now -
Battery Analytics Tutorial Course 2/3: Data Capture and Trend Reporting
This one-hour webinar is Part 2 of a 3-part series. Battery management systems take large amounts of sensor data readings on a continual basis as part of their functionality. Battery analytics involves leveraging battery performance data for tasks such as identifying issues that can reduce battery life, flagging behavior that can negatively impact energy storage system performance, and predicting remaining cell and pack life.
This webinar will focus on the following key topics:
• Sensor data capture, aggregation and manipulation into performance reports
• Real-life examples will be shared, where aggregated historical data was analyzed and anomalous behaviors were identified
• Also shared will be the inspections and testing of the pack to identify the cause of the anomalous behavior, and the discovery and resolution of the problems that caused the anomaliesPresenter
Michael Worry – CEO at Nuvation EnergyMichael Worry founded Nuvation in 1997 and has grown the company over 21 years into a thriving electronic products and engineering services firm with offices in Sunnyvale, California and Waterloo, Ontario Canada. He is the CEO of Nuvation Energy, a provider of battery management systems and engineering services for large-scale energy storage systems.
Buy Now -
Energy Storage RTE Tutorial Course 3/3: Total Battery System RTE – Ranking and Comparison of Different Battery Chemistries
RTE impacts of HVAC/Ventilation and Inverters will be described. Batteries generate heat, and this must be dissipated by system cooling and/or taken out of the system. Heat generated can be calculated by looking at IR heating and that generated (net) by exothermic reactions. Examples will include LFP, Li-NMC, Lead Acid and Nickel batteries, both when they are fresh, as well as at their end of useful life. The overall ancillary equipment energy usage will be listed for these systems, and a % RTE loss will be calculated for both nominal rate and high rate applications. Commentary will be provided for other systems. RTE will be summarized and ranked for most energy storage battery chemistries including ZA, NaS, LiS, Saltwater, Liquid Metal, Zinc Bromine and Fuel Cells.
This webinar will focus on the following key topics:
• RTE impacts of Inverters and HVAC
• RTE impacts for ancillary equipment for different systems
• RTE numbers for most battery systems being considered for energy storagePresenter
Dr. Halle Cheeseman – Founder/President at Energy Blues LLCDr. Halle Cheeseman earned a PhD in Electrochemistry & Corrosion from the University of Nottingham in UK, graduating in 1985. She has held several executive positions in the battery industry over the past 32 years, including Sr. VP of R&D at Spectrum Brands and VP of R&D at Exide Technologies. Her specific battery experience includes Lithium Ion, Zinc Air, Nickel Metal Hydride, Nickel Iron, Alkaline and Lead Acid, focusing on Consumer, Industrial, Automotive & Renewable Energy applications. In July 2017, Dr. Cheeseman founded Energy Blues LLC, an energy storage consulting cooperative comprising 20+ subject matter experts.
Buy Now -
Certification Challenges for Secondary Use EV Batteries
As the 1st generation of Lithium-ion based hybrid and battery electric vehicles are reaching end-of life, or original traction batteries are being replaced with new batteries, the interest in secondary life or repurposing of these batteries continues to grow. Lithium-ion batteries present several challenges to Auto OEM’s, Recyclers and waste operators. Repurposing of EV batteries for non-automotive applications also creates new challenges for certification and acceptance by AHJ’s (Authorities Having Jurisdiction). This webinar discusses the current market challenges and concerns, while providing a roadmap of the current options for various usage cases of reused or repurposed EV batteries.
This webinar will focus on the following key topics:
• Understand the usage cases for secondary life batteries
• Review market drivers for secondary use batteries
• Review the concerns of battery and cell manufacturers with re-use of lithium-ion batteries
• Discuss the unique challenges to certifying used batteries for new applications
• Discuss current options for certification in the US marketPresenter
Rich Byczek – Global Technical Director for Transportation Technologies at IntertekRich has over 20 years of experience in product development and validation testing, 14 of which have been spent at Intertek. Mr. Byczek is also an expert in the areas of energy storage, audio equipment and EMC testing. He sits on several SAE, IEC, UL and ANSI standards panels, focusing on Energy Storage and Electric Vehicle Technologies. He holds a Bachelor of Science in Electrical Engineering from Lawrence Technological University in Southfield, Michigan, and is based at the Intertek facility located in Plymouth, Michigan.
Buy Now