Certification Challenges for Secondary Use EV Batteries

Related products

• 

  Avoid Battery Explosions and Fires – With Right Data and Better Designs

  Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.

  The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.

  A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.

  This webinar will focus on the following key topics:

  • Why battery fires and explosions occur
  • How to design safer batteries through understanding of heat generation
  • Video evidence of batteries under explosive conditions
  • How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
  • Laboratory instruments suitable for testing and data generation

  Presenter
  Dr. Jasbir Singh – Managing Director at Hazard Evaluation Laboratory

  Jasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.

  A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.

  Buy Now
• 

  Battery Selection Tutorial Course 3/3: Integrating Your Battery Into Your Product – Designing for Worst-Case Scenarios

  The last part in Exponent’s three-part series, this webinar will focus on the finished product from the viewpoint of the battery. How can you best protect your battery within your device? Is your battery going to be user-replaceable? If you’re creating multi-cell packs, how should they be separated from (yet still connected to) each other? Should a thermal event occur, how can you prevent that from cascading through the whole pack? This webinar will help to answer many of those questions, and discuss design questions to help safeguard your battery pack throughout its entire lifecycle.

  This webinar will focus on the following key topics:

  • Creating multi-cell packs
  • Containing thermal runaway events

  Presenter
  Exponent – a multidisciplinary engineering and scientific consulting firm with significant experience in various aspects of battery design, safety testing and failure analysis.

  Buy Now
• 

  Energy Storage Potential and Opportunities in India

  India has aggressive targets for shifting to renewable energy, which at present is un-scheduled, and stresses the energy systems. One of the important means to meet these challenges is use of energy storage technologies. With launch of Smart Grids and Electric Vehicles missions, and new programs for on-site solar energy and rural micro-grids, energy storage has become a crucial component of energy strategy for India. This presentation will mainly focus on opportunities and potential of energy storage in India.

  This webinar will focus on the following key topics:

  • Drivers for Energy Storage in India
  • Energy Storage Market Potential in India
  – Grid Integration of RE
  – 100 planned smart cities
  – Microgrids
  – Electric Vehicles
  – Net metering policies
  – Other opportunities
  • Smart Grid Vision and Roadmap for India
  • Energy Storage Initiatives in India

  Presenter

  Akshay Ahuja – Business Analyst (India Smart Grid Forum)

  Akshay is currently working as Business Analyst with India Smart Grid Forum, a public-private partnership initiative of the Ministry of Power, Govt. of India. At ISGF, he is working closely with two working groups namely “Policy and Regulation” and “Pilots and Business Models”.

  He is also part of modelling team working with Planning Commission of India on energy scenario exercise by putting all relevant numbers together into a calculator called “India Energy Security Scenarios, 2047”, for which he has worked on four themes – Electricity Import/export, Electrical Energy Storage, Carbon Capture and Storage, and Transmission & Distribution (T&D) losses and currently is also working on version 2 of the tool. He is also a contributor to India Smart Grid Bulletin, a monthly newsletter by ISGF.

  Akshay earned an MBA in Power Management from National Power Training Institute (NPTI), and has a B.Tech in Electrical and Electronics Engineering from Lingaya’s Institute of Management and Technology.

  Buy Now
• 

  Development and Testing of Electric Drives and Battery Management Systems

  Many types of hybrid and electric drive (E-Drive) control systems are being developed for platforms in several industries. These systems also use Battery Management Systems (BMS) to handle their demanding power needs. However, the development of these technologies brings increased system complexity, evident in the many platform variants and control algorithms of various electronic control units (ECUs).

  dSPACE provides comprehensive solutions for E-Drive or BMS development, from providing proper hardware I/O interfaces for prototyping/testing these applications to real-time models for simulation of these controlled systems. There is also the need for consideration of power and safety requirements and precision of the simulation or control capability.

  This presentation will cover RCP and HIL systems and models for the development and validation of E-Drive and BMS control systems. Specific implementation techniques for model processing and interfaces in real-time along with critical power interface and electrical hardware functionality will be shown.

  This webinar will focus on the following key topics:

  • Real-time Simulation Models for Electric Motors and Battery Systems
  • Rapid Prototyping hardware for E-Drive and BMS Development
  • Hardware-in-the-Loop (HIL) Simulators for testing E-Drive/BMS Systems

  Presenter
  Jace Allen – Lead Technical Specialist – Simulation & Test Systems at dSPACE Inc.

  Jace is the Lead Technical Specialist for Simulation and Test Systems at dSPACE, Inc, having designed and managed over 200 Hardware-in-the-Loop (HIL) system implementations for various customers. In the past 20 years he has handled many diverse modeling, controls, and simulation test applications in the Automotive, Commercial Vehicle, and Aerospace areas. His background includes modeling, simulation, and product development for vehicle powertrain, safety/security systems and also software development with embedded controls tools. He is a member of SAE, IEEE, and AIAA and has published 10 SAE Papers.

  Buy Now