$0.00
Functional Safety plays a critical role in the design and development of active control and safety systems across multiple industries, including automotive/EV, micromobility and stationary energy storage. This discussion outlines several of the core industry or regulatory requirements for functional safety as it applies to battery safety control systems. Specific areas of discussion are risk assessments, comparing various functional safety reference standards, and interpreting requirements across multiple certification schemes and standards.
This webinar will focus on the following key topics:
• Identifying key battery/ ESS standards
• Applying functional safety requirements to battery management systems
• Selecting appropriate Functional Safety standards
• Performing battery-specific risk assessment
Presenter
Rich Byczek – Global Technical Director at Intertek
Rich Byczek is the Global Technical Director at Intertek. He has 30 years of experience in product development and validation testing, with over 20 years at Intertek. Rich is experienced in the areas of energy storage, product validation, EMC and Quality Management. As Intertek’s Global Technical Lead for Electric Vehicle and Energy Storage, Rich sits on several standards technical committees and working groups. He holds a Bachelor of Science in Electrical Engineering from Lawrence Technological University and is based at the Intertek EV and Battery Center of Excellence located in Plymouth, Michigan.
Intertek is a proud sponsor of this event.
Related products
-
Advanced Techniques For Addressing Issues in Battery Safety and Performance Using Adiabatic Calorimetry
FREE Webinar – THT is a proud sponsor of this event.
Adiabatic calorimetry is a widely utilized technique within the field of battery safety research. The method has been adapted from the chemical industry to address a significant range of safety and performance tests on battery components, cells and even modules.
Although a number of different battery tests may be employed using the ARC, interpretation of results is not always straightforward. Some of the principles which apply to ARC chemical testing do not translate directly to battery testing due to the variable nature of samples.
This presentation describes both the advantages and limitations of ARC testing on batteries and how the ARC test can be adapted to address different questions in battery research as well as quality control.
This webinar will focus on the following key topics:
• The principles of adiabatic calorimetry (ARC)
• How calorimetry can be used in battery testing
• What we learn from battery testing by calorimetry
• Pressure measurement and gas collection during thermal runaway
• Advanced testing techniques in adiabatic battery calorimetryPresenter
Danny Montgomery – Technical Performance Manager at THTDanny Montgomery joined THT in 2009 after graduating from Southampton University with a master’s degree in physics. His current role as Technical Performance Manager involves running the calorimetry lab with involvement in technical aspects of THT’s instrumentation.
Danny’s focus is primarily on lithium battery calorimetry; both adiabatic and isothermal. He oversees the use of calorimeters for customer sample testingas well as installing calorimeter systems and provided training and technical supportfor battery and automotive companies worldwide, such as Panasonic, BMW and Samsung. Danny works in THT’s UK office in Milton Keynes.
Buy Now -
Adding Intelligent Battery Management to Lead-Acid Energy Storage Systems
Lead batteries are resilient and have a low likelihood of catastrophic failure. However, their lifespan can be significantly reduced when operated outside of manufacturer specifications. The extension of lead battery life through active battery management is becoming a compelling value proposition for vendors of lead-based energy storage systems.
The evolving regulatory environment governing energy storage safety is also impacting how both lead and lithium chemistries are to be managed moving forward. Join Nuvation CEO Michael Worry to explore the reasons why active battery management is becoming adopted in large-scale lead battery applications, and how the changing regulatory environment is impacting lead-based energy storage.
This webinar will focus on the following key topics:
• Controlling off-gassing in vented and VRLA lead batteries
• Emerging functional safety regulations and UL 1973
• Using a BMS to reduce the levelized cost of energy
• Automating stack connection sequencing in a multi-stack ESS
• Lead-based energy storage system deploymentsPresenter
Michael Worry – CEO at Nuvation EnergyMichael Worry founded Nuvation in 1997 and has grown the company into a thriving electronic products and engineering services firm with offices in Sunnyvale, California and Waterloo, Ontario Canada. He is the CEO of Nuvation Energy, a provider of battery management systems and engineering services for large-scale energy storage systems.
Buy Now -
Avoid Battery Explosions and Fires – With Right Data and Better Designs
Modern Li Ion batteries contain hazardous chemicals and heat up during use – this combination always has the potential to cause fires and explosions. This presentation will focus on improving the understanding of how such incidents occur, what can be done to avoid them and how the risk can be minimized during early stage design.
The solution lies in knowledge of the heat generation rate during normal use, and information about safe boundaries such as temperature, discharge rate & overcharge in realistic situations that represent actual conditions of use. Data from commercial batteries of different types, including videos of batteries undergoing thermal runaway, will be used to illustrate these points.
A relatively new technique will also be discussed with data, which allows total heat output during discharge to be measured on-line and this can be used both for design and battery modelling. Examples of the data will be provided.
This webinar will focus on the following key topics:
• Why battery fires and explosions occur
• How to design safer batteries through understanding of heat generation
• Video evidence of batteries under explosive conditions
• How better thermal management systems can be designed – based on heat measurement from isothermal calorimetry
• Laboratory instruments suitable for testing and data generationPresenter
Dr. Jasbir Singh – Managing Director at Hazard Evaluation LaboratoryJasbir is a chemical engineer specializing in thermal hazards and calorimetry, traditionally for the chemical industry but now increasingly involved in battery safety, especially Li-ion EV and related types.
A graduate of Imperial College (London), where he undertook PhD into combustion and explosions, his experience includes many years in process design for the chemical and petrochemical industries. He is currently developing test methods and instruments for use in design of battery thermal management systems.
Buy Now -
Battery Safety Assessment: From Cell to Pack Level
FREE Webinar – PlugVolt is a proud sponsor of this event.
For fast and reliable battery pack development, a virtual assessment of battery safety via simulation is presented. The methodology, from single cell abuse testing up to battery pack simulation of crash and crush loads, is discussed. Cell tests that provide detailed understanding of the mechanical behavior of single Li-ion cells are used to improve battery stiffness and to optimize battery pack design.
This webinar will focus on the following key topics:
• Method description: battery safety assessment from cell to pack level
• Abuse cell tests
• Abuse cell simulations
• Crash and crush simulations at module and pack levelsPresenter
Jeremy Gaume – Project Manager, Analysis of Engineering and Technology Powertrain Systems at AVL GmbHJeremy Gaume graduated from the University of Technology of Belfort-Montbeliard (U.T.B.M.), France, with a Master Diploma in thermo-mechanical system modelling and optimization. He has 10 years’ of experience in the automotive field. Before joining AVL, he worked at Magna Steyr for CAE crash (passive safety) assessment. After joining AVL, he was appointed as a Project Manager for Analysis of Engineering and Technology Powertrain Systems. Jeremy is an expert on crash/safety simulation for batteries.
Buy Now