Showing 73–76 of 81 results

  • Placeholder

    Enabling High-Rate Lithium Metal Anodes by Tailored Structures and Interfaces

    Oxide-based solid-state Li-batteries (SSLiBs) have the potential to be a transformational and intrinsically safe energy storage solution, due to their non-flammable ceramic electrolyte that enables the use of high-capacity Li metal anodes and high voltage cathodes for higher energy density over a much wider operating temperature range. However, their progress has been limited due to electrode/electrolyte interfacial issues. In particular, for Li-metal anodes concerns over dendrite formation/propagation and the requirement for elevated temperature and high stack pressure are still prevalent. To eliminate these concerns, a rational design of tailored structures and interfaces in Li-metal anodes will be presented. In addition, progress toward full cells using these tailored structures and interfaces will be presented.

    This webinar will focus on the following key topics:

    • Li-metal wetting of oxide electrolyte interface
    • Effect of oxide surface defects on Li dendrite formation
    • Effect of 3D structure on localized current density
    • Avoiding stack pressure to maintain uniform Li/oxide contact

    Presenter
    Dr. Eric D Wachsman – Director of Maryland Energy Innovation Institute

    Dr. Eric D Wachsman is the Crentz Centennial Chair in Energy Research and a Distinguished University Professor at the University of Maryland. He is also President of The Electrochemical Society (ECS) and Editor-in-Chief of Ionics, a Fellow of both ECS and the American Ceramic Society; elected member of the World Academy of Ceramics; the recipient of the Carl Wagner Award; the Sir William Grove Award; the Fuel Cell Seminar & Exposition Award; and the HTM Outstanding Achievement Award from ECS. His research is focused on solid ion-conducting materials and the development of solid-state batteries, fuel cells, ion-transport membranes, and gas sensors. He has more than 270 publications & 35 patents, and to date three companies have been founded based on these technologies.

    Buy Now
  • Placeholder

    Detailed Approaches for Post-Mortem Analysis of Lithium Ion Batteries

    Performance degradation of Lithium Ion Batteries (LIBs) is an important problem not only battery users, but also for battery manufacturers and material suppliers. In this webinar, we will present two topics related to the Post-Mortem analysis of LIBs – one is the performance degradation of SiO anode, and the other is a detailed procedure for the quantitative analysis of electrolyte decomposition and SEI formation on graphite negative electrode.

    Toray Research Center can provide detailed and comprehensive data analysis of chemical and morphological changes, using latest instruments, to support material and product performance improvements. Customers can utilize the data set to investigate what may have happened inside the battery, and can correlate the performance degradation with that data analysis.

    This webinar will focus on the following key topics:

    • Lithium Ion battery
    • Post-Mortem analysis
    • SiO anode
    • Electrolyte degradation and SEI formation
    • Morphological observation and Composition analysis

    Presenter
    Yasuhito Aoki – Researcher at Toray Research Center

    Yasuhito Aoki is a researcher at Toray Research Center. He has been working on material analysis of battery related materials using Raman and infrared spectroscopy.

    Toray Research Center, Inc. is a proud sponsor of this event.

    Buy Now
  • Placeholder

    Results from a Comprehensive Battery Benchmarking Index

    This talk introduces a comprehensive battery benchmarking index that provides data-backed insights into cell performance needed to evaluate and select the optimal batteries for your application. In this talk, we present a broad and diversified cell database and present the preliminary results from rigorous comparative analysis of these cells. We will end with industry leading battery analytics, enabling customer organizations to be agile and employ best practices with regard to testing and analysis in engineering.

    This webinar will focus on the following key topics:

    • Comparative analysis of cells in recently released products including EVs and power tools
    • Demonstration of large scale analysis across the benchmarking database
    • Demonstration of leveraging models and experimental data together

    Presenters
    Dr. Christianna Lininger – Director of Battery Engineering and Sciences at Voltaiq
    Dr. Jan Richter – CEO and Co-Founder at Batemo

    Dr. Christianna Lininger is the Director of Battery Engineering and Sciences at Voltaiq. She has a Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) focused in Chemical Engineering from Columbia University in the City of New York. Following her graduate studies she undertook post-doctoral studies at University of California, Berkeley. Her research was focused on theoretical computational chemistry and physics-based modeling for renewable energy technologies.

    Dr.-Ing. Jan Richter studied electrical engineering and information technology at the Karlsruhe Institute of Technology (KIT). He focused on electric mobility and the fields of electrochemical energy storage, power electronics, and electrical machines. He has completed his doctorate on modelling, parameter identification and control of highly-utilized synchronous machines, graduating summa cum laude.

    Voltaiq is a proud sponsor of this event.

    Buy Now
  • Placeholder

    Advances in Battery Performance and Safety Testing using Calorimetry

    This presentation describes two main types of calorimetric techniques that can be used to carry out performance and safety testing on high-energy batteries.

    The first half of the presentation introduces isothermal calorimetry; focused on the new IBCx system from Thermal Hazard Technology (THT). Method of operation, hardware overview and examples of data will be presented.

    The second half of the presentation covers battery testing methods for the ARC adiabatic calorimeter system. The theoretical background of the test method will be described, and new developments to address blade-type batteries and high ampere-hour cells will be presented.

    The presentation also mentions complementary test methods and optional modules that can be integrated with calorimetry to provide more useful analysis. For example; fast-tracking heaters, online gas analysis etc.

    This webinar will focus on the following key topics:

    • Principles of isothermal and adiabatic calorimetry testing for high-energy batteries
    • Advantages and limitations of these two methods
    • New product developments from THT to address market test requirements
    • Discussion of THT lab testing results

    Presenter
    Matthew Stewart – Application Scientist at THT

    Matthew Stewart joined Thermal Hazard Technology UK in 2021 following his graduation from Swansea University with a master’s degree in chemical engineering. In two years he has accrued a wealth of experience in battery testing and instrumentation. In his role as Application Scientist, he helps to manage THT’s test lab and carries out cutting-edge testing on the latest energy-dense cell designs. Matt has worked with several of the UK’s leading motorsports, aviation and performance vehicle manufacturers.

    THT is a proud sponsor of this event.

    Buy Now